UNSOLVED

zstar5000

updated

20 years ago

Z

zstar5000

12 Posts

0

1808

January 11th, 2007 00:00

USB 2.0 question

I have a 4700 that I bought in Dec of 2004. From the time I bought it I was under the impression that it had USB 2.0 on board, which apparently it does not. Every time I plug a 2.0 compatible product in, XP tells me that the device would work better plugged into a 2.0 slot. Unfortunately, I can't pull up the invoice since it was just over two years ago, and my tech support was only for one year. Is there any way to find out if 4700's from that time came with USB 2.0? And if so, what do I do since mine didn't? thx
  • shesagordie

    12 Elder

    •

    46017 Posts

    107

    0

    Posted January 11th, 2007 00:00

    zstar5000

    The D-4700 has USB 2.0 ports,
     
     
    Bev.
     
     
     
     
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.
  • zstar5000

    12 Posts

    107

    0

    Posted January 11th, 2007 00:00

    Thanks.  I just went into device manager and saw that I had to install a driver, which luckily was already on the machine.
  • shesagordie

    12 Elder

    •

    46017 Posts

    107

    0

    Posted January 11th, 2007 01:00

    zstar5000
     
    Happy to hear, that the problem is resolved.
     
    Bev.
     
     
     
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.
  • psstevens

    2 Posts

    107

    0

    Posted January 11th, 2007 20:00

    I have an E521 purchased Oct. of 2006. When I plug my Kingston Data Traveler II+ in I get the message telling me that I would get better performance if it was plugged into a USB 2.0 port. It does this both on the front and the back ports. This did not happen with my older Dell. I am sure that the ports are USB 2.0 ports. Is there something that I can do to get better performance?
  • zstar5000

    12 Posts

    107

    0

    Posted January 11th, 2007 21:00

    Go to control panel, system, choose the "hardware" tab, and select "device manager."  You should see something related to USB 2.0 sticking out from the device tree with a exclamation mark in yellow by it.  Double-click on that, and there should be a message saying that the driver is out of date or not installed, something like that.  Choose "update driver" and follow the prompts to install the driver.  It should find it and install it; if not post again and someone with a little more knowledge will help you!  But this worked for me yesterday.
  • psstevens

    2 Posts

    107

    0

    Posted January 11th, 2007 23:00

    The suggestion below sounded like a good idea but there was no yellow exclamation point. I found the Data Traveler listed under Disk Drives and tried to get it to update anyway, but it did not find any more recent drivers.




    @zstar5000 wrote:
    Go to control panel, system, choose the "hardware" tab, and select "device manager." You should see something related to USB 2.0 sticking out from the device tree with a exclamation mark in yellow by it. Double-click on that, and there should be a message saying that the driver is out of date or not installed, something like that. Choose "update driver" and follow the prompts to install the driver. It should find it and install it; if not post again and someone with a little more knowledge will help you! But this worked for me yesterday.