
UNSOLVED
unable to access 'Setup'
After pressing the power button and beginning Win98SE boot, the blue Dell Logo appears for less than a second to be replaced by 'Go Back' logo loading. When the Dell Logo first appears, I have immediately hit the 'delete' key and then again as the 'Go Back' loads but have never been able to stop the process and enter 'Setup'. I have read all the material in Dell Knowledge Base regarding access to Setup and the postings to this conference without help. I have emailed dell.support with no answer. I spoke with tech support who suggested disabling 'Go Back' which I did but still have the problem. I have changed keyboard, tried hitting other function keys, escape key, etc. instead of delete key without help. Any suggestions?
Dimension 4100, P111 866MHz, 256 MB RAM, 20 GB HD.
Dimension 4100, P111 866MHz, 256 MB RAM, 20 GB HD.
Responses (3)
Solutions (0)
Hi John,
Agreed. If entering Setup is not required, I would wait until you hear back from Tech Support in some manner. The possibility exists, that, should you really need into Setup, uninstalling GoBack for the moment might allow the system to return to the normal method of Setup entry as well. I don't have that software, so I don't know that this will work, but it also remains on the list of things that could be done. Since it appears most people feel that GoBack is interfering, it might be worth a try to go to their website and see if you can find anything on this matter. It looks to me like it is taking a sort of supervisory role in the POST which is preventing the keystrokes from having an effect, but that is just a distance diagnosis, and between that diagnosis and a couple of dollars, you can get a cup of coffee.
Your plan sounds good to me.
Have a good one,
Kay
Hi,
I don't advocate this if you can possibly avoid it, but you can force the system into Setup by simulating a stuck key situation. I've heard that you must hold a key down, and eventually the system will force itself into setup in order to view the log and clear the error. Even if the error is simulated, that is, you know that there is not really a stuck key, you will still need to view the DMA event log and clear the error, once in Setup.
It may take a few tries for the system to realize a key is down during the boot POST.
As I say, I can't advocate it, and it is highly doubtful that Dell Tech Support would recommend the method, but it's a possibility if you can find no other way in. The risk here is that you may create the error, but the BIOS still not take you to Setup, evidently due to the BackUp software. In this case, you would add a stuck key error report to the mix.
HTH,
Kay

jsham
1 Rookie
•
4 Posts
235
0
Posted March 21st, 2001 13:00