
UNSOLVED
tranfering data from old computer to new
I have a 3 year old Optiplex GXa and just bought a new Dimension 4100. Without a Zip drive, 2nd hard drive or CDRW on my old computer, how do I tranfer all my data from the old to the new?
Marty
Marty
Responses (2)
Solutions (0)
- MrHobbes idea of putting the old drive as a slave is easier, but if you got a burner with the new computer there is another way I have used, but only once.
I took the burner from the new computer and installed temporarily (not in a drive bay but lust laid it on the computer) into the old and copied a bunch of files to the CD's. Then reinstalled the CD-RW back to the new computer. That also gave me a backup of the older files. The hard drive to hard drive MrHobbes mentioned is probably easier (have done it both ways), but this is an alternative.
Good luck
Glen
4100 933Mhz
19VH001
FFD4001
Win98SE

MrHobbes
9 Posts
162
0
Posted January 15th, 2001 16:00
One way would be to remove the HD from your Optiplex, jumper it to slave or cable select, and plug it into your new comp. Then you can just copy the data directly from HD to HD. When you are done, put the jumper back and return the old HD to your GXa.
If you want some pictures check:
http://support.dell.com/docs/systems/dzuul/rr.htm
for your 4100
for your GXa:
http://support.dell.com/docs/systems/dfuj/remove.htm
Another method would be to network the computers together, but if you don't already have 2 NICs and a hub or crossover cable, this would be much more work.
(sure you can pull your new HD and put it in the old comp also)
Send me an email
18779713, status: