
UNSOLVED
T7600 with VelociRaptor (WD1000DHTZ)
Looking through tech specs and docs and trying to determine if the T7600 can accept a WD VelociRaptor 10kRPM drive as a 2nd and 3rd drive?
I'm looking to update the system for video editing and the 10k drive would be nice but specs from the factory are call calling out 7200 RPM SATA drives.
Anyone have knowledge if the 10k will be a worthwhile option?
Thanks!
Responses (3)
Solutions (0)
renderfarmer
19 Posts
218
0
Posted May 16th, 2013 07:00
I have several WD1000DHTZ drives in a RAID-5 array. They have the same compatibility as any other HDD and will work in the T7600.
They're surprisingly quick in a RAID-5. Obviously not compared to an SSD array but definitely better than 7200RPM. It all depends on your budget and capacity requirements.
I use mine for second tier storage. Primary is an SSD RAID-0 array. If you can afford an LSI RAID card with fastpath I highly recommend it over anything highpoint or Adaptec make. I've also used LSI's cachecade2 feature and that works pretty well (SSD in front of slower spinning disk array).
Planetwide
1 Message
218
0
Posted March 20th, 2014 11:00
Hi Renderfarmer, I'm actually looking to upgrade my T7600 with a similar configuration (to improve video editing with Adobe Premiere, AfterEffects CC).
My OS is already on an SSD and I was planning to create a raid array (Raid 0 or 5) with either 2 or 4 WD1000DHTZ drives to hold media files, etc.
May I ask how you've configured this in your system. I was planning on using the T7600 raid controller (my T7600 came with the Perc H310) and putting the HDDs in the four lower 3.5 drive bays. The SSD would occupy one of the upper 2.5 drive bays. Or are you using a 3rd-party raid controller?
Any guidance would be appreciated. Thanks!

lombana
6 Posts
218
0
Posted May 2nd, 2013 07:00
I guess there is an alternative now that I've done some research outside the box... Looks like a Highpoint 2720 Raidcard along with a few Intel 520's may actually be the best answer for video editing and (1) 2TB drive in the box for exporting and misc files.