
UNSOLVED
S
SilverMobius
3 Posts
0
10249
June 16th, 2005 05:00
System Setup = BIOS?
Now, I'm pretty new to the whole computers thing, so here goes.
I want to go into my BIOS to change some options, but all I can seem to get to is this "System Setup" screen, which doesn't have the options I need. Is this actually the BIOS and I am missing something, or am I doing something completely wrong? I have been pressing F2 on startup at teh Dell splash screen. I run a Dimension 4600i. Thanks for any help!
I want to go into my BIOS to change some options, but all I can seem to get to is this "System Setup" screen, which doesn't have the options I need. Is this actually the BIOS and I am missing something, or am I doing something completely wrong? I have been pressing F2 on startup at teh Dell splash screen. I run a Dimension 4600i. Thanks for any help!
Responses (6)
Solutions (0)
- SilverMobius, try tapping the F2 key as soon as the system is powered up. Also if you are using a USB - wireless keyboard try switching the port the keyboard is plugged into. Some of the newer Dell models offer only one USB port that is active during boot up and that can be found on the rear of the system. Otherwise the USB ports are inactive until Windows loads the necessary drivers or USB Emulation is enabled in the BIOS Setup.
SilverMobius
3 Posts
222
0
Posted June 16th, 2005 17:00
That is what I have been doing, yet all I can get to is the "System Setup" screen, which doesn't have the options I need (I want to undo some "overclocking" that the previous owner of this computer did, as I don't want to damage the system). Thanks for the response though.superconductor6
58 Posts
222
0
Posted June 17th, 2005 08:00
The previous owner might have done "software overclocking", but Dell board doesn't natively support overclocking. You might have to use some special softwares / tweakers for this.- SilverMobius, a Dell BIOS is pretty limited in what options are available and can be changed. As Superconductor604 pointed out the Dell BIOS lacks any overclocking options. If the previous owner did overclock the system then they did so using a third party utility like CPU FSB which adjusts the Front Side Bus setting from with-in Windows. I would double check to see that no unwanted utilities are running in the background after Windows loads. If you are still concerned about any BIOS settings the previous owner may have changed then consider restoring all the BIOS settings back to their default settings. Click here for a Dell Knowledge Base article that will explain how to do that on your model. After the procedure is done all the BIOS settings will be the way they were when the system shipped from the factory.
SilverMobius
3 Posts
222
0
Posted June 17th, 2005 14:00
Thanks! That helps me out.

superconductor6
58 Posts
222
0
Posted June 16th, 2005 07:00