UNSOLVED

KJHogan

updated

22 years ago

K

KJHogan

7 Posts

0

34334

February 13th, 2005 01:00

Stuttering Audio Visual on New Dimension 8400

Our new (one month old) Dimension 8400 has jerky and stuttering audio and visual. For example, the windows XP tour has difficulty playing and the dial up modem can't even get the correct tones out. It does not seem to affect the audio cds. At Dell's suggestions, we restored to the factory conditions, no solution. We down loaded and installed an audio patch (soud blaster audigy with dolby  5.1), no solution. We down loaded a video patch (nvidia gforce). This patch installization just got stuck in a "do-loop" detecting and unistalling an older driver, restarting the computer to install the new driver, but detecting an old driver and uninstalling the old driving, restarting the computer to install the new driver but...We still have a problem. Diagnostics says everything checks out, but the computer still doesn't work. I've spent alot of time as an unpaid technician working for Dell to fix a brand new computer without any success. Dell doesn't seem to have a solution, and now tells me it's a third party software issue and maybe some other unpaid Dell technicians on this forum can help. It is all factory installed components and software on a new computer. Are other people experiencing this type of stuttering and jerking with the sound and visual on their new Dimension 8400? I'd like to know if you are having this problem even if you don't have a solution. I would greatly appreciate hearing from you.
 
Thanks.
  • TasmanianD

    15 Posts

    421

    0

    Posted February 13th, 2005 07:00

    I have the same problems. Found out many people do but haven't seen a solution yet. My problem exists especially while playing audio (mp3) from a IDE Harddisk. Any other activity then makes the audio sounds like a record being played on half the speed. I am breaking my head on this for 4 weeks now.... :-(
  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    421

    0

    Posted February 13th, 2005 08:00

    It would seem you have more than "audio" troubles.  The fact it "stutters" with the Windows tour suggest either a major hardware problem or Operating System issue.  If the modem isn't working correctly it again goes back to a possible OS or Dell chipset driver installation.

    If this is a new system, you have 21 days from the date it was shipped to contact customer service and get a return authorization for either credit or refund, after that it's yours. 

    If it's past the return date, the first thing to do is a complete "clean" install.  I don't know what Dell had you do to return it to the original condition but the "clean" install is in order as the first step.

    That entails reformatting of the hard drive and then installation of Windows, then the Dell chipset drivers, then any other dell drivers and finally any dell supplied applications.  However, newer systems are not being shipped with all the backup/restore CD's that older ones had so you need to check the Dell operating manual to see how to do a complete "clean" install for your specific system.

    As this is not just an audio problem, your post would be more applicable in either the Windows XP software section or in the General Hardware section of the forum.

     

    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • Theman13

    12 Posts

    421

    0

    Posted February 13th, 2005 15:00

    Maybe you need to reset PIO to DMA (Direct Memory Access). A link on how to do this is http://www.michna.com/kb/WxDMA.htm
    Also search "DMA reverts to PIO"
    This can be a problem on hard drives or cd dvd drives.
  • TasmanianD

    15 Posts

    421

    0

    Posted February 13th, 2005 20:00

    Theman13 , thanks for your advice. I think i am on to something because of that. I noticed my IDE drive which is being connected as a second slave drive (alongside my DVD rewriter) is in PIO mode and i cannot get the drive on an other mode how hard I try. So I guess the performance is so bad because of this PIO setting.
     
    I did everything including the guides on the pages you mentioned but the drive keepes comming back in PIO mode :-( Driving me completely nuts.
     
     
  • Theman13

    12 Posts

    421

    0

    Posted February 13th, 2005 21:00

    I had a difficult time getting my computer reset also. Even after I did I had bad sound out of the slave drive and computer has set it back to PIO. I got a big runaround with Tech support on Saturday and never did get an answer. After 2 hours waiting and getting transfered on the phone, Tech support told me to call back on Wednesday. The direct number is 1-800-624-9896 options 3 1 3 . Good Luck! Keep me posted.
  • Theman13

    12 Posts

    421

    0

    Posted February 13th, 2005 21:00

    Also look in the CD/DVD Devices posts, quite a few people have problems when two CD/DVD devices are installed.
  • TasmanianD

    15 Posts

    421

    0

    Posted February 14th, 2005 20:00

    Oke I tried really all the possibilities. Did every thing on this page: http://users.bigpond.net.au/ninjaduck/itserviceduck/udma_fix/#Solution
     
    I simply can't get my second IDE device from PIO into DMA mode. This thing is really bugging me nuts.
     
    Did someone/anybody managed to install a IDE ATA harddisk along a DVD or CD player in a Dell  8400 and run this harddisk in DMA mode? I think this is impossible.  
  • Theman13

    12 Posts

    421

    0

    Posted February 15th, 2005 05:00

    TasmanianD and all,
    Dell has a Utility to set Secondary IDE controller CD devices to DMA mode, located at
     

    the download is PIOtoDMA.exe, run the file and it will create a folder. The default location is C:\Dell\dell in the dell folder is PUSHDMA2.EXE. Run it and and you'll be reset to DMA.
    I rebooted to see if the fix held and it doesn't on my computer it was back to PIO. I think microsoft has a fix to stop the IDE controller from reseting. I havn't tried the fix yet and I won't try till tommorow because its late but the link for the fix is:
     
     
    the fix is near the bottom of the page in MORE INFORMATION. It involves editing the registry for "(reducing the transfer mode after six consecutive time-out or CRC errors instead of after six cumulative time-out or CRC errors)"
     
    Anyone who hasn't edited registries, make sure you  read the warnings about doing so. I hope this fixes it.
  • TasmanianD

    15 Posts

    421

    0

    Posted February 15th, 2005 10:00

    Thank you for the suggestions. I have installed the Dell PushDMA.exe tool and added it to my startup folder (could be nicer but it gets executed on startup now) because when I reboot the setting is lost.

    I also applied the patched from Microsoft i.e. editing the Registry and enter the ResetErrorCountersOnSuccess Dword value 1.

    BUT no succes!!! The device setting repports UltraDMA mode 2 but when I check with drivesitter (http://www.otwesten.de/drivesitter/features.htm) this excellent piece of software reports that there is no UltraDMA mode selected however available.

    So unfortulately I have to report the problem is still there, just checked and the stuttering is still not gone :-(  

    Message Edited by TasmanianD on 02-15-2005 06:54 AM

  • Theman13

    12 Posts

    559

    0

    Posted February 15th, 2005 17:00

    TasmanianD,
    I called Dell support and I was told that the sound card does not support 2 DAE (digital audio extraction) ports. I guess that means the master (first) port is in digital and the slave (second port) is in analog? He then asked if the sound was comparatively bad (if the master is of high quality and the slave OK). I told him that I would not listen to audio out of the slave drive because of the stuttering.

    I then told him about the DMA alwas being reset to PIO, and how we attempted to fix it with the PUSHDMA2.EXE. He said that PUSHDMA2.EXE is also supposed to do a registry edit to keep the IDE controller set to DMA. So the Microsoft registry edit isn't neccessay. I told him the fix will not hold. (As you found through drivesitter it probably never really got set to UltraDMA mode). He thinks that there is probably still a registry issue, and even though it is a Microsoft problem, he will search for a fix through Microsoft. He said he will call me if he finds a fix.

    I guess that because of the slave not using DAE the sound quality will never be as good as the master drive, but I would at least like it to be good.
    Question to all,
    -Does anyone get good sound quality out of the Slave (second) device with a Dell Dimension 8400 with integrated audio?
    -Will a sound card raise the audio to acceptable?