
UNSOLVED
Starting over
OK, I posted a message yesterday about starting my Dimension over. I was wondering if whether it is better to use the "ZZ Top" method or the FDISK method? I don't know too mjuch about the ZZ Top method. Is it easier for a computer illiterate? The easier and simpler method is what I'm looking for!
I read the website about the FDISK and it sounds kind of complicated with the partitions and all that. All I want is to start over the exact same way that the computer was shipped to me. Does that mean that I would have to deal with all of that partition stuff? Also, on the FDISK site, it says to create a Boot Floppy Disk "with the necessary drivers"...does that mean that the ONLY thing I need on the floppy disk is FDISK.exe and FORMAT.com??? Please help. Thanks.
Brandon
I read the website about the FDISK and it sounds kind of complicated with the partitions and all that. All I want is to start over the exact same way that the computer was shipped to me. Does that mean that I would have to deal with all of that partition stuff? Also, on the FDISK site, it says to create a Boot Floppy Disk "with the necessary drivers"...does that mean that the ONLY thing I need on the floppy disk is FDISK.exe and FORMAT.com??? Please help. Thanks.
Brandon
Responses (3)
Solutions (0)
Hi Brandon,
If you want your computer to be in the same condition it was when it shipped, then you would need to zztop it. The success of this depends on whether the image Dell put on your hard drive passes an integrity test or not--once in a while, a program installed after you got the system will corrupt the image, and in this case, zztop will not run.
If you are happy with the partitioning of your hard drive, you do not need to fdisk--this utility is used to create or remove partitions.
Other than zztop, the other way to get Windows cleaned up, as well as other programs is to reformat and reinstall the programming. If zztop works correctly, it is simpler; if it doesn't, you will need to reformat and reinstall to clean things up.
A boot disk for a system with healthy RAM is easiest to make from My Computer | Control Panel | Add/Remove Programs | Startup disk. This will put all the utilities needed, as well as your CD-ROM driver on a floppy disk for use in fdisking, reformatting, or emergency boot situations. You really should get this made as soon as possible, no matter whether you decide to reformat or not. You never know when you will need it, so make it and keep it safe. Make a new one if you ever get a new CD-ROM or change operating systems.
I'm not sure where all you have gone for instructions, but the best I have ever seen are located here. He has several documents you may be interested in, so I have sent you to the front page.
Should you decide to reformat, be sure you know where your drivers are for all your parts which need them; Windows has some rudimentary drivers, but you will want to be current as soon as possible. Back up all the data you will want to keep--if you have more than one partition on the hard drive, or more than one hard drive, copy the backup data onto another partition or hard drive. Sandy P's advice of going over your hard drive folder by folder to look files over and decide what to keep is right on target, because if you reformat, it will be gone unless backed up first.
Finally, know where your OS CD(s) are, as well as your product ID number, and locate the extra programming you want to install, along with any needed product ID numbers or serial numbers. Word/Works, for instance needs such a number--that is located in the manual which came with the CDs.
Good luck with it,
Kay- You need a win 95 or 98 startup disk. If you don't have one go to Add/Remove Programs in the Control Panel and make yourself one.
Boot pc with the startup disk in it. Change over to the C: and type C:\\zztop.bat
Follow instructions to reload factory. This is all done with the assumption that zztop.bat is still functioning on your hard drive. Also formatting your hard drive is not that difficult, just a little scary. Good luck

Denny Denham
2 Intern
•
18798 Posts
227
0
Posted January 25th, 2000 20:00
I don't have ZZTop so I can't comment on that. I redid the C:\ partition of my hard disk without using FDISK. I was (and am) happy with the four partitions my system came with. If you don't want to change partitions you don't have to deal with FDISK at all. You merely format each partition you want to redo.
Since you want to start over exactly as the system was when you received it you will want to format each partition that has been changed. You can do this easily with your boot floppy disk. To attempt to clarify what that is, it is a floppy disk which you make when you go to Start|Settings|Control Panel. Double-click Add/Remove Programs, select the Startup Disk Tab and follow the instructions to make the boot floppy. Make sure that it can access your CD-ROM drive.
Boot your system with that disk in it and to format your C:\ drive (which has Windows on it) type format c: /s and answer yes (Y) when asked if you want to proceed. If you want to format other partitions merely type format x: where x is the drive letter.
As is the case with all the various sets of instructions, make sure you back up everything that you can't reinstall from CDs (data files and that sort of thing) and have the various disks for the drivers of your peripherals handy (or your Resource CD if you have a system that came with one).
If you have downloaded any programs such as IE 5.01 which come with a self-extracting .exe file, you might seriously consider placing all of them on a partition which you do not format as it is much faster to reload them from a hard disk than to download them again.
I'll let someone more familiar with ZZTop give you their advice on the relative ease of using that program to restore your system. Good luck.
Want to make a hyperlink in your post, want to add a graphic or sound file, need to troubleshoot a non-working Java applet, want to build an attractive signature. These capabilities can be yours if you visit Denny's DellT@lk Tutorials