UNSOLVED

nayabryan

updated

20 years ago

N

nayabryan

5 Posts

0

922

October 24th, 2006 15:00

SOLUTION FOR SHAKING MEDIA CARD READER~~!!!!!!

I see quite of few of us who have 410 are complaing about shaking media card reader.
It's rather very simple to fix this problem.
 
1. TAKE OUT THE SIDE COVER
2. TAKE OFF THE FRONT PLASTIC MOLDING AROUND THE BLACK AREA 
3. UNPLUS THE CABLE FOR MEDIA READER
4. PULL THE SPRING FROM THE SIDE TO RELEASE THE READER
5. MOVE THE READER TO ONE SLOT ABOVE.
6. PUT THE READER CABLE BACK
7. PUT THE FRONT COVER BACK
8. PUT THE SIDE COVER BACK
9.  THE SHAKING IS GONE!!!!!!!!!!!!!!!!
  • dwlovell

    196 Posts

    130

    0

    Posted October 24th, 2006 15:00

    And if you had the floppy drive option you move the floppy out of the top down where the media reader *was* and now the floppy shakes. Basically the black plastic locking strip at the back of the drive bay prevents the drive screw from moving farther back. This is why the floppy doesn't move but the media reader does. If you have both drives, it has been said before, just add another screw to the media reader in the bottom slot (a traditional tight-threaded floppy screw) and it wont move anymore. You can get this screw for free from pretty much any computer chop-shop in town. Just ask for a CD-ROM or floppy screw that they have lying around.
     
    -David

    nayabryan wrote:
    I see quite of few of us who have 410 are complaing about shaking media card reader.
    It's rather very simple to fix this problem.
     
    1. TAKE OUT THE SIDE COVER
    2. TAKE OFF THE FRONT PLASTIC MOLDING AROUND THE BLACK AREA 
    3. UNPLUS THE CABLE FOR MEDIA READER
    4. PULL THE SPRING FROM THE SIDE TO RELEASE THE READER
    5. MOVE THE READER TO ONE SLOT ABOVE.
    6. PUT THE READER CABLE BACK
    7. PUT THE FRONT COVER BACK
    8. PUT THE SIDE COVER BACK
    9.  THE SHAKING IS GONE!!!!!!!!!!!!!!!!