UNSOLVED

Jubo

updated

27 years ago

J

Jubo

7 Posts

0

4641

May 4th, 2000 20:00

Service Vectors

When I shut down my XPS T600, windows'98S computer I get the error message: "error: could not install service vectors..."

Anyone knows what this means? Is it hardware related? Software related? It happened after I turned the computer on today and it made a lot of noise at first. Then I shut it down immediately and after a few minutes I turned it on again and it's running as usual. But I don't trust that error message when I shut it down...

-----
Jurren Bouman
email: jubo@euronet.nl
  • 382

    0

    Posted May 4th, 2000 21:00

    Hi Jubo,

    I'm getting the same error message you are when I shut down. I read Pam's response to you and tried editing the EMM386 command in Config.sys, but neither modification worked. So, I disabled the SB16 Emulation and that did work.

    Question is What won't I have now? I mean, what did the SB16 Emulation give me that it won't be able to give me now?

    Also, was the error message I was getting before regarding not being able to install the service vectors doing any harm? What are service vectors anyway? I figure it's a trade off. The system still shut down by itself, but if my sound is going to be impaired just so I won't get that error, I wonder if it's worth it.

    Dee


  • David .

    2 Intern

    •

    1097 Posts

    382

    0

    Posted May 6th, 2000 01:00

    If none of the suggestions yet given solve your problem, try the following:

    1. Uninstall Sound drivers on the computer system.
      1. Go to Add/Remove Programs in Control Panel, highlight Sound Blaster Live! Value and click Add/Remove.
      2. Click Yes
      3. Click Yes To All
      4. Click Yes
      5. Click OK
    2. Uninstall Video Drivers on the computer system.
      1. Click the Start button, point to Settings, and click Control Panel.
      2. Double-click Display, and click the Settings tab.
      3. Click Adapter, click the Change tab, click Next.
      4. Select the option to display a list of drivers, and then click Next.
      5. Select Show all Hardware button, then select the Standard display types from the Manufactures list.
      6. Select Standard PCI Graphics Adapter (VGA) from the list, then select Next.
      7. Click Next to install the driver, click Finish, and then select Apply to complete the installation.
    3. Install Video Drivers on the computer system.
      1. Download the drivers from here
      2. Click on the file to start installation of the video drivers.
    4. Install the SoundBlaster sound drivers.
      1. Download the latest sound drivers from here.
      2. You must download the “Complete Package A”
      3. Double click on the file to start the installation of the software.






  • Jubo

    7 Posts

    382

    0

    Posted May 6th, 2000 06:00

    Thanks to Pam and David and all others that helped me. I did have to disable the SB16 emulation driver. But the error message is gone now.

    I only wonder why I got the error message after using this computer for 6 months now. The only thing I installed, and this was last week and the computer has been running for almost a week now, is the Logitech webcam Pro. Which also has the RealPlayer in it.
    You think this might have caused the problem?

    Thanks to all for your help.

    Jurren



    -----
    Jurren Bouman
    email: jubo@euronet.nl
  • 382

    0

    Posted May 6th, 2000 13:00

    Now I know the culprit was RealPlayer. I uninstalled RealPlayer & RealPlayer Jukebox through the control panel. Then I uninstalled SoundBlaster entirely. I restarted the system and installed the updated drivers that David suggested. Voila! No more error message on shut down and SB 16 emulation is enabled.

    Thanks for all your help, Pam and David. That error message was driving me nuts.
  • 382

    0

    Posted May 6th, 2000 13:00

    Hi David,

    I had to disable SB Live in order to get rid of the error message too. I just downloaded RealPlayer not long ago, so I tend to agree with Jurren.

    I'm downloading the upgrades you suggested now. But in your instructions, you say to uninstall SB live. But the directions from their website says NOT to uninstall. It says to let the software do it. Does it matter?

    Dee
  • 382

    0

    Posted May 13th, 2000 01:00

    This did not work when I got to the
    DEVICE=C:\WINDOWS\EMM386.EXE M6 I=E000-E3FF
    this line caused a "While Init NTKERN Windows Protection Fault" and I had to
    boot the computer in safe mode and rem the line out and reboot.

    I removed everything in the procedure and only added NOEMS to (EMM386.exe
    noems) and I no longer
    get the error. I would not get the error with the procedure because they
    stop the loading of the EMM386 at all. Is emm386 used in only DOS
    applications or does windows use it also? Can I use the "ram" option
    instead?

    Phil Jenkins

  • 382

    0

    Posted May 13th, 2000 17:00

    The DEVICE modification for EMM386 in the autoexec.bat didn't work for me either, but neither did the NOEMS addition.

    The only thing that works for me is to completely uninstall RealPlayer and reinstall SBlive or disable SBlive in the control panel.

    As far as your questions go, I have to refer them to someone else because I really don't know, but I do believe that EMM386 is used for DOS and not Windows. I'll try to refer them to either Pam or Dave.

    Dee