
UNSOLVED
Seem to common for somebody to not know how to fix-
I have a Dell Dimension, 128 MB, Windows'98 Second Edition, Office 2000. I have tried everything I know and lots of other suggestions but can not get my computer to stop locking up. I have even been told that it is a problem because I use the DSL and the connection is too fast. I feel that somebody out there must have figured this out. I have been through the usual uninstall/re-install, msconfig changes, etc. If you have any suggestions I'm game.
Thanks
Thanks
Responses (11)
Solutions (0)
- Is this a new computer? Is this a newly installed DSL connection and its been doing this since the installation, or is it a problem that started occur all of a sudden. When you do get back into the system, has your network configuration changed in anyway? If you look in Device Manager (Right click on "My Computer" then select properties from the drop down menu and click on the "Device Manger" tab), are there any devices shown with a question mark or yellow exclamation point? On the same screen, higlight "Computer" and click on the "Properties box, below. Is your network adapter sharing any IRQs with any other devices? If so, which devices (besides IRQ steering)? From what you describe, it sounds like a hardware problem, but I think we need further information berfore we can proceed.
Steve - I wish I could just copy all this stuff. There are no question marks or exclamation points. At the risk of sounding really stupid I must say there is nothing under the properties box that says it is a network adapter. The only numbers with more than one thing are #9 has a win-mod, Yamaha Audio, USB Universal host, and IRQ holder for PCI steering. #11 has Nvidia RIVA TNT and IRQ holder for PCI steering. #14 and #15 both have Interl PCI Bus matrix DE... and Primary IDE.
The computer is not that old. I had a cable connection and now have a DSL. The problem has gotten alot worse since the change over. I feel like there is something missing somewhere. It often seems that the computer will not release the current display so I can go to another one. Sounds funny but that is how it acts. Sorry I am not more "Tech-savy". - What kind of network adapter do you have? Is is a USB network adapter? If so, then that would explain why it doesn't show up on the IRQ screen. If it is not a USB adapter, then it should show up in the list of devices. Again, right click on "My Computer", then select "Properties". Click on the "Device Manager" tab. In the list of devices, click on + sign next to "Network Adapters" to expand the list. What devices are listed there?
Steve - Sorr - I did the SCANREG/RESTORE thing the tech said try and it wiped out my modem which I can not get back working even after 2 hours with the BellSouth guy.( Now using Dial-up)
I have listed the following:
ATI AT 2000 PNP Ethernet
Dial-Up Adapter
Dial-Up Adapter#2
Efficient Networks Spead Stream 4060 PPP
Microsoft Virtual Private Networking Adapter - That sound sood and I think the cable people did put something in my computer when they hooked up the cable - can you give me a little more hint as to what it might look like - all I can remember is that it was a flat circuit board looking thing less than the size of 1/2 sheet of paper. (Real technical right). The cable people deny even opening my computer so...I need to know what to look for.
- That's very interesting. First, you are apparently using a Efficeient Networks Spreadstream 4060 USB DSL ethernet card that connects directly to your DSL modem. I am unfamiliar with this device, but it explains why it doesn't use a IRQ, since it connects through the USB port. Second, you appear to have another ethernet adapter installed - the ATI AT 2000 PNP Ethernet. The strange thing about this, is that it does not use an IRQ either, unless you failed to see it in the listing of IRQs on the "Device Manager/Computer/Properties Screen". You mentioned that you used to have a cable modem. Is this network adapter left over from the installation of the cable modem? Did the DSL provider remove the drivers for this other network adapter when they installed the DSL system? This is strange, as it shows up in the device manager, but does not show up in the computer properties.
I tried to find information about both network adapters, and I was successful for the Speed Stream. Click HERE for a link. I went to the ATI site to look for information on the ATI AT 2000 adapter, but could only find information on Video Cards. This is puzzling.
The only thing I can suggest, without spending days doing more research, is that you could manually pull out the ATI AT network card, if it really exists on your computer, and see if this solves the lock-up problem. You might also want to contact your DSL provider and inform them of what we have found, and see if they have any suggestions. Let me know what you find out. Good Luck!
Steve - The network card, when viewed from the back of the computer, has a single port that looks like a phone connection port, but is larger. The board should also have some printed itendifying information on it that would tell you it is an ethernet adapter.
Steve

hollybeetle
6 Posts
599
0
Posted February 8th, 2001 20:00