UNSOLVED

w0yd

updated

25 years ago

W

w0yd

2 Posts

0

4512

March 6th, 2002 14:00

Restart on Shut Down

I'm pretty sure I've seen references to this prblem somewhere on
this list, but can't find the answer now.

I have a Dimension 8200 running WindowsXP and now find that
when I try to shut down the computer with mouse cursor on the
screen, the computer restarts and the only way I can shut it down
is to hold the button on the case in for 5-6 seconds.

I think there is cure for this but can't find the answer. Could somebody
point me in the right direction. Thanks!

  • 179

    0

    Posted March 6th, 2002 14:00

    try flashing bios, but be mindful of the directions and notes on d/l page

  • brndnsdad

    11 Posts

    179

    0

    Posted March 6th, 2002 15:00

    I recently had this problem and reinstalled the driver updates from the Roxio website. The CDRW software was the culprit and I've had no problem since I resinstalled the drivers. Thee are two drivers to install and the order of installation does matter. Follow their directions.

  • DECx

    143 Posts

    179

    0

    Posted March 6th, 2002 22:00

    Most likely WinXP encountered a system failure during shut down (if you use Roxio EZ CD Creator 5 Pt, its most likely the culprit). If the "automatically restart" option is checked in system properties > advanced tab > startup and recovery WinXP will restart whenever it encounters a system failure. Its best to disable this so you will know what caused the error.

    If you do have EZ CD 5 Pt getting the update from Roxio should solve the problem.

    Dimension 8200 2.2GHz
    512MB RAM
    GeForce3 Ti500
    P992 Trinitron
    WD Caviar 120GB SE
    TB Santa Cruz
    Altec Lansing ADA995
    Liteon 16x DVD
    Liteon 24X/10X/20X CD-RW
    Conexant voice/data/fax modem
    Linksys LNE100Tx 2.0
    WinXP Pro