UNSOLVED

blundin

updated

18 years ago

B

blundin

17 Posts

0

5301

June 12th, 2008 16:00

Repalcement PSU for my 630 on the way - 7 days?

The power supply on my 630 died (after having it for only a few weeks) and they are shipping me a new one.  I took the option to install it myself as the rep said it would get here sooner that way.  Well, the order for it in my account is showing that it will be shipped 7 days after my call - the tech said it would be 3-5 or less.  Has anyone seen extended ship times on replacements like this?
  • cademetz

    2 Intern

    •

    1327 Posts

    388

    0

    Posted June 12th, 2008 16:00

    This post has been removed in protest of DCF's and Dell's policies, behavior, lack of respect, and poor treatment of the community.
    Message Edited by cademetz on 06-19-2008 02:54 PM
  • Davet50

    6 Operator

    •

    14442 Posts

    388

    0

    Posted June 12th, 2008 17:00

    If you have the next day warranty then this should be shipped immediately. The only excuse would be if there was a real shortage of them..
  • Kesuke

    165 Posts

    388

    0

    Posted June 12th, 2008 17:00

    I had my 630i PSU replaced for other reasons. If there is ANY way you can arrange an engineer to fit it, I thoroughly recommend it, it is a MAJOR operation. You'll need to:

     

    1.) Remove the mobo heatsink

    2.) Remove the soundcard from the mobo

    3.) Remove the upper graphics card

    4.) Remove the lower graphics card (if you have one)

    5.) Remove the entire motherboard

    6.) Disconnect the old PSU (a major undertaking in and of itself)

    7.) Attach and fit the new PSU

    8.) Reattach the mobo

    9.) Reattach lower graphics card

    10.) Reattach upper graphics card

    11.) Reattach soundcard

    12.) Clean the thermal paste off the heatsink

    13.) Clean the thermal paste off the CPU

    13.) Apply a fresh layer of thermal paste

    14.) Fire it up and hope to god it works

     

    And if it doesnt work, chances are tech will blame your fitting skills.

  • blundin

    17 Posts

    388

    0

    Posted June 12th, 2008 18:00

    I've built several PCs myself, so I'm not worried about the complexity of the work - but your statement that the CPU heatsink needs to be removed thre me for a loop. I'm not at home looking at the mobo, but I don't recall looking at it and thinking it needed to be removed for this... I know a couple of the lines from the PSU run under the mobo, but that did not look too complicated...
    Message Edited by blundin on 06-12-2008 02:49 PM