UNSOLVED

Rav88

updated

19 years ago

R

Rav88

25 Posts

0

16208

August 29th, 2007 17:00

People who have done the exchange

I’m just trying to figure out if any one chose to use the on site installation option. I once had a tech install something in my notebook and he ended up breaking a piece. I don’t want the same to happen to my desktop. Although I’ve never taken apart a desktop, I would think I could manage. Should I get the tech to install or do it myself?
  • Rav88

    25 Posts

    676

    0

    Posted August 29th, 2007 17:00

    Thanks very much for the quick response pointguard1122! That’s what I suspected as far as a tech installing it. Anyone else's opinions would also be greatly appreciated. Thanks in advance.

    Message Edited by Rav88 on 08-29-2007 02:47 PM
  • pointguard1122

    1891 Posts

    676

    0

    Posted August 29th, 2007 17:00

    I would do it myself.  I did the swap myself, but the mobo was bad.  The sent out another one and a tech.  The guy was making alot of mistakes.  He tried to pull the mobo off the tray.  He tried to take the mobo out before removing all of the connection to it.  I had to supervise.  He was very nice and ended up doing a good job, but it took a little instruction.  When my XPS700 mobo was replaced last year, the tech scratched the side of my case.  I am still not very happy about that.
  • gdwrnch3

    2 Intern

    •

    3278 Posts

    676

    0

    Posted August 29th, 2007 18:00

                       It's a pretty easy and straight forward job. I had already replaced my 700 motherboard once, so I knew what to expect. The front io flat cable can be a pain, I removed the four power supply screws, raised up the powersupply, and slid the cable through the back. Be sure to write down which port each sata cable is plugged into, this is especially important if your not going to do a new windows install. 2 hours, start to finish, if your installing XP, add another 45 minutes to an hour, Vista a little less.
        I have a few pics posted here:  www.pbase.com/champ3jd/xps_720&page=all if you care to check them out.
    Good luck, and have fun,
    jd
  • tphillips63

    4 Apprentice

    •

    2629 Posts

    •

    7922 Points

    676

    0

    Posted August 29th, 2007 18:00

    Yeah it's not rocket science and if in doubt watch the video and take a picture or two yourself before you start.
    You will be much happier about the change afterwards.
    Make sure you have good lighting and enough space to stretch out and it will be no problem.
  • laserraiser

    34 Posts

    676

    0

    Posted August 29th, 2007 19:00

    I done mine this morning. Lots of fun. Just take your time and all will go well. It's not hard at all, everything fits very well. I, on the advice of gdwrnch3, also lifted the power supply and fished out the old cable and routed the new one in. Thst was a little tricky but be patient and it'll go right in there.
  • Davet50

    6 Operator

    •

    14442 Posts

    676

    0

    Posted August 29th, 2007 23:00

    ok
    so does anyone have info on a tech install?????
  • ian1937

    1 Rookie

    •

    103 Posts

    676

    0

    Posted August 30th, 2007 02:00

    Hi All,
     
    Here in North Vancouver BC, I had a tech install.  They came the next business day after the delivery of the mobo.  It was a local contractor (Unisis) in Burnaby.  It was his first install under this program but he knew what he was doing.  No glitches whatsoever I'm a very happy camper.  It took him an hour and included setting up the bios properly.
     
    Thanks again Dell - great job.
  • Gontue

    180 Posts

    676

    0

    Posted August 30th, 2007 03:00

    I've never done anything to a PC besides add a hard drive and upgrade the memory and processor.  I decided to tackle changing the mobo myself and personally I'm glad I did.  The thought of a strangers hands inside my computer bugged me.  I think I did a better job making sure everything was clean and organized when I did the reassembly.  I took pictures of everything. 
     
    XPS 720 H2C
    QX6700 2.66GHz Overclocked to 3.47GHz
    4GB RAM
    Dual 768MB nVidia GeForce 8800GTX
    Raid 0 Dual 160GB 10000 rpm
    X-Fi sound card
    Ageia PhysX Processor
    1 kilowatt Power Supply
    Windows XP Pro
  • chama98

    2 Intern

    •

    424 Posts

    676

    0

    Posted August 30th, 2007 08:00



    Rav88 wrote:
    I’m just trying to figure out if any one chose to use the on site installation option. I once had a tech install something in my notebook and he ended up breaking a piece. I don’t want the same to happen to my desktop. Although I’ve never taken apart a desktop, I would think I could manage. Should I get the tech to install or do it myself?


    I have asked the tech guy for an enginner to come out, so hopefully he is on his way to fit the new board for me, I could do it but I can't be bothered, and I would be worried that I might do something wrong.
     
     
  • odenwalder

    1 Rookie

    •

    1182 Posts

    195

    0

    Posted August 30th, 2007 13:00



    ian1937 wrote:
    Hi All,
     
    Here in North Vancouver BC, I had a tech install.  They came the next business day after the delivery of the mobo.  It was a local contractor (Unisis) in Burnaby.  It was his first install under this program but he knew what he was doing.  No glitches whatsoever I'm a very happy camper.  It took him an hour and included setting up the bios properly.
     
    Thanks again Dell - great job.


    Hi Ian,
     
    Since the tech did a good job, that's Unisys not Unisis. I work for the same company - different division. :smileyvery-happy: