
UNSOLVED
T
timsmith10000
94 Posts
0
4296
January 2nd, 2008 09:00
Old computer dead
Hi...I have a very old TIME computer that was only good for word and the internet. (128mb ram, 20gb hard drive etc) anyway, last night I tried to turn it on but nothing happened, effectively dead.
I had used it a week prior to this, and when I tried to turn it off, it wouldn't, so I pressed the power button on the front, and all that happened was that all the disk drives tried to load, so I was just going round and round in a circle so I was forced to turn the PC off at the mains. Didn't think anymore about it.
Obviously the PC is old and useless, but it was still used on occassion - so before I bin it, could there be anything I should check to see if I can fix it? (I have tried 2 different power cables to make sure it wasn't the fuse in the plug).
I know it isn't a Dell computer but my main PC is - so I feel I have the right to post this here :)
Thanks for any help.
Responses (11)
Solutions (0)
timsmith10000
94 Posts
380
0
Posted January 2nd, 2008 13:00
Thanks for the reply.It is dead - you press the power button and nothing. No hint of life anywhere!timsmith10000
94 Posts
380
0
Posted January 2nd, 2008 19:00
Thanks for your help. But in total honesty, the computer is at least 8 years old, and I could buy an equivilent for about £10 off ebay!Don't want to waste your time.Thankstimsmith10000
94 Posts
380
0
Posted January 3rd, 2008 14:00
Yeah, I took off the front cover and pushed the actual trigger.- Sorry, I wasn't being clear. Have you checked the actual switch mechanism.The contacts and cables etc? Sometimes they can be flukey in old PCs. All that heat and vibration and so on.Look at the fan at the rear of your PSU VERY carefully, then get somebody to press the on switch firmly. Does the fan shake or judder any, or does it stay perfectly still?
timsmith10000
94 Posts
380
0
Posted January 4th, 2008 14:00
I had inspected the cables and unplugged/replugged them in.The computer is completly dead. No sign of life anywhere.

dbramlet
2187 Posts
380
0
Posted January 2nd, 2008 11:00