
UNSOLVED
Nvidia System Control software a failure on 710H2C?
Speedfan cannot control my fan Speed. IK8FanGUI cannot control my fan speed.
I try to use Nvidia System Control and that works, but the fans seem to run at one fixed speed regardless of any changes I make to the actual fan sliders.
If I move them to 20%...same noise. If I move the System fan to 100%..same noise.
The software seems extremely erratic and unreliable.
Also, for my 8800GTX card, the GPU Fan Control is grayed out. I need to use Rivatuner to change this.
Surely there is a better way to control this system's cooling than this?
Responses (3)
Solutions (0)
I find that utterly ridiculous.
This is a high end machine, an expensive machine, and we should have better support than that.
In the first place, the Hardware based BIOS cooling should work. It should not allow the temperatures to reach dangerous levels on the Graphics Card and the processors.
I should not have to switch on Performance mode, I'm not overclocking the system further than the BIOS allows, or doing anything fancy. For basic cooling, the system should take care of itself.
I'm really disappointed about this. :-\

Davet50
6 Operator
•
14442 Posts
234
0
Posted October 16th, 2008 16:00
Nope There is none. What most do is just ramp up the case fans to a level when they want to use them and live with the noise.
Riviatuner is the best way to control you GPU. Nvidia software has always been junk on the the 700/710/720 systems