UNSOLVED

LANCORP_88b25e

updated

14 years ago

L

LANCORP_88b25e

2 Intern

•

224 Posts

0

60146

June 15th, 2012 08:00

New XPS One 2710 Questions

Couple of quick questions regarding the new 27" XPS One 2710 (Ivy Bridge).

I just received mine, and apart from a non-functioning keyboard/mouse combo, things seem to be working well.

First, SATA ports.  Can anyone confirm if SATA port 1 is 6GB/s or 3GB/s?  It seems the BIOS supports RAID, but there are only two SATA connectors on the mainboard, meaning if I wanted a RAID 0 SSD set, I'd need to connect a SSD to the SATA 1 (which is currently the optical drive).  I did connect a Crucial m4 to the SATA 1 and it's coming up 3GB/s, and SATA 0 is 6GB/s.  When I run HWINFO, it shows SATA 0 and 1 are 6GB/s capable.  Is it a BIOS limitation?

A nice RAID 0 SSD set would be very nice, but with one at 6GB/s and one at 3GB/s, that will hinder throughput.

Second, and more of a comment than a question, is the fans.  They seemingly crank up at 4000RPM's and are quite noisy, for no apparent reason.  When this was happening, my CPU was pretty much idle and nothing going on.  I have a couple CPU monitor gadgets, etc., and they both showed 0-1% CPU usage.  Upon shutdown and reboot, the fans were back at 1500RPM or so (still seems higher than necessary, and has an audible noise that certainly differentiates it from my 27" iMac that this unit might be replacing).  The iMac is completely silent, and in my quiet office, any fan noise is distracting.

  • Mary G

    6 Operator

    •

    20095 Posts

    749

    0

    Posted June 15th, 2012 14:00

    This review might answer some of your questions-- www.pcmag.com/.../0,2817,2404922,00.asp

    Have you already contacted Support about the KB & Mouse? If not--Ask Tech Support about your concerns.

  • LANCORP_88b25e

    2 Intern

    •

    224 Posts

    749

    0

    Posted June 16th, 2012 09:00

    Thanks Mary, I'll take a look at the review.  Regarding the KB/Mouse issue, yes I did contact them and unfortunately, since it's so new, they don't have a readily available replacement to send out yet.  They offered to replace the whole system so as to get a new KB/Mouse, and I might take them up on it if something doesn't show soon, as I really liked the one that came with the XPS One 27 system compared to a different Dell wireless KB/Mouse I got from another XPS system (an XPS 8500) ...it's not so great.  

    I have a few other observations and quirky issues, but not sure the best place to direct them to.  Maybe someone from Dell can chime in and point me in the right direction.

  • russgold

    1 Message

    749

    0

    Posted June 25th, 2012 00:00

    They are both SATAIII(6Gb/s~600MB) gigabits(Gb) not gigbytes(GB) open Intel Rapid Storage Technology program click Manage > Then click the Disks Separately > Then click advanced > It shows each being SATA 6GB/s and it shows a RAID 0 already configured.

    • The Seagate 2TB in mine ST2000DM001 has a sustainted data transfer rate of 210MB/s and is a SATAIII drive.
    • The SSD that came in it(which is only used as cache with the Intel RST) is made by Samsung an 32GB 830 series which is Samsung's most recent SATAIII the old model was the 430 series and only supported SATAII.
      • The 830 series Samsung specs show Sequential read of 520MB/s and writes of 320MB/s 

    This computer is a complete rip off of the iMac in more ways than I care to list, but Dell decided they wanted to take shortcuts with a plastic back not like the iMacs aluminum which dissaptes the heat, so yes the fans will be a little noiser but they don't seem to loud on mine with ambient room temp ~77

    What I want to know is how to set the orange function keys above the F keys to work without having to hold down fn. Sucks you got bad keyboard and mouse to begin with though.

  • LANCORP_88b25e

    2 Intern

    •

    224 Posts

    749

    0

    Posted July 2nd, 2012 21:00

    Thanks for the reply.  BUT, I did not mean the mSATA slot (where your 32GB card is), I meant the other SATA port (the one the DVD drive is connected to).

    I wanted to connect another SSD to that SATA connector.  When I do, and check it with the Intel RST, it shows it at 3Gb/s, not 6Gb/s like SATA 0.

    Also, the fans in mine are not loud unless I really push the system for a prolonged time, in which case the fans speed up to a very audible level and never go back down.  I'm very familiar with computers (I'm in IT for 25 years) and this behavior is not normal.

    Lastly, I too wish the BIOS had a setting like other Dell computers that allowed the Fn keys to be either multimedia or Fn, so we don't have to push the orange Fn key first!

    Thanks.

  • kutafon

    6 Posts

    749

    0

    Posted July 27th, 2012 20:00

    SATA 0 is 6Gb/s

    SATA 1 is 3Gb/s

    mSATA is 6Gb/s

    If you want to use RAID 0 you need a standard 2.5" SSD + mSATA SSD. You can buy Mushkin 240GB or Samsung 830  256GB in mSATA format

  • xps-2710

    6 Posts

    749

    0

    Posted August 7th, 2012 07:00

    Same here

    have also ST2000DM001inside.

    Im thinking too of replacing it to a corsair gt Series with 256Gb

    But dont know if thats the BIG Difference to the already fast seagate.

    I speed all my Notebooks up with ssd and the speed was extrem better.

    But here i really dont know if its worth  comparing the speed and /but having a much more smaller drive

  • omidontop

    7 Posts

    749

    0

    Posted January 20th, 2013 06:00

    Hello!

    I used a script to re-map the F8-F12 keys to the FN+(F8-F12) instead and it works pretty well. I used AutoHotKey (www.autohotkey.com) to do so. Here's the compiled script which works well in my computer at least.

    Hope this helps.

  • Ric

    3 Posts

    749

    0

    Posted February 12th, 2013 04:00

    @xps-2710

    Instead of replacing your fast and roomy hard disk, you can add an msata sata3 ssd like Crucial M4 (32/64/128gb) in your empty msata slot and use it as cache of your mechanical disk (see other posts on howto with intel rapid storage) or better you can create an image of your boot disk on the msada disk (possibly the 128/256gb) and boot from there which is the fastest solution (great speed and large space).

     

    Saludos amigos

     

    Ric from italy