
UNSOLVED
MSDOS Program
The following error message occurs when running
the "PING" or "TRACERT" programs in a DOS shell:
"This program cannot be run in DOS mode"
These programs have always worked as long as
I have been using them.
Also the following error occurs uopn start up of
Windows 98 EMM386-Unable to set page frame
buffer address.
the "PING" or "TRACERT" programs in a DOS shell:
"This program cannot be run in DOS mode"
These programs have always worked as long as
I have been using them.
Also the following error occurs uopn start up of
Windows 98 EMM386-Unable to set page frame
buffer address.
Responses (3)
Solutions (0)
- The error with PING and TRACERT are a result of the error with EMM386 you are receiving. Follow one of the three possible solution below:
- Disable DOS audio Support:
- Go to Device Manager
- Expand the Creative Miscellaneous Devices
- Select Creative SB16 Emulation
- Click the Properties button
- In the Creative SB16 Emulation Properties window, place a check mark in Disable in this hardware profile and click OK.
NOTE: It is necessary to disable the SB16 Emulations in Windows, if not, the DOS audio driver (SBEINIT.COM) will load when the system is started. - A red "x" will now be next to Creative SB16 Emulation...this is NORMAL.
- Close Device Manager.
- Add REM in front of the C:\PROGRA~1\CREATIVE\SBLIVE\DOSDRV\SBEINIT.COM line in the AUTOEXEC.BAT file.
- Add REM in front of the C:\WINDOWS\EMM386.EXE line in the CONFIG.SYS file.
The CONFIG.SYS and AUTOEXEC.BAT file can be modified with either MSCONFIG, NOTEPAD, SYSEDIT or EDIT.
NOTE: Placing the REM at the beginning of the DOS audio driver line will NOT affect sound support for Windows-based applications and games.
- Add an exclusion to the EMM386 Line:
In the event DOS audio support is required, modify the EMM386 command in the CONFIG.SYS file and add M6 I=E000-E3FF to the existing EMM386 line. The line would appear like this once the modification have been made:
DEVICE=C:\WINDOWS\EMM386.EXE M6 I=E000-E3FF - Prevent EMS from loading:
In the event the above solution still gives the EMM386 error message, add NOEMS to the EMM386 line. The line would appear like the following example:
DEVICE=C:\WINDOWS\EMM386.EXE NOEMS
NOTE: Previous versions of EMM386.EXE required a "/" (forward slash) before NOEMS. It is no longer required.
- Disable DOS audio Support:

jdc
1 Rookie
•
8 Posts
172
0
Posted May 18th, 2000 22:00
Value Sound Card. I do not have a Soundblasster
Live Sound Card as indicated by the files listed
in your post.