UNSOLVED

NEBIL

updated

25 years ago

N

NEBIL

1 Message

0

7115

August 23rd, 2001 14:00

MEMORY USAGE + startup question

dimension xpst 500-pentium 3 500mhz

First scenario, Typically when I startup a pc I hit Caps lock during startup to see if the light turns on so that i know that the pc hasn't locked up.
In my case, when I startup cold from a turned off powerstrip it takes about 3 to 5 minutes to startup up and the caps lock light check has a 4 to 5 second lag.

For a normal startup with no cap lock lag I have to hit the power button wait a second then turn of the pc then turn it on again, which still take 2 minutes to startup, but no lag.
I've been told it's normal but I've never had it happen on any other machine. I check the lights on the back of the pc I get the error lights of IDE problems nut only the first time i turn on the pc.Aany answer?


second senario
I have 128 sdram but seem to max out my cache on typical usage. I kill everything in the background but sytray and explorer and I still eat my cache. Opening window response time is a miserable 2-3 seconds. I have alot of peripherals. could memory be affect by IRQ sharing violation? My factory hardrive grinds as it processes which i know is normal but I kinda seems excessive. I ran diagnostic and scandisk. but no problem.



  • NoahB

    54 Posts

    230

    0

    Posted August 23rd, 2001 15:00



    Hi Nebil,

    Regarding scenario #2. I'm assuming you are doing the Remove Program *CONTROL*ALT*DELETE* thing when you speak of leaving Systray & Explorer on. Are you familiar with running MSCONFIG and shutting off items that are of no signifigance to your needs. If you're not sure of this area, GET HELP, before shutting items off. However, you won't be deleting anything, you're just shutting stuff off, so it won't load on boot up. However, there are things in there that are critical to your PC operating properly, so proceed with caution.

    Also, over time you may have unknowingly gathered a very substantial array of FONTS. Yes, fonts. If their numbers reach 500 or more they can be a real START-UP ANCHOR on your PC. Unless you are running a Font Manager program of some kind, every font on your HD loads when you boot up.

    I hope this helps!

    Best regards,

    Roger

  • Chancie86

    133 Posts

    230

    0

    Posted August 23rd, 2001 19:00

    If the LED's point to an IDE problem I would get on the phone to Dell straight away. The bad loading times may be a result of a bad hard disk or motherboard.

    Second of all, it doesn't matter how much RAM you have but Windows only uses I think around 64k or something for its system resources. I've got memory leakage problem, which used to result in a sluggish machine but I downloaded a freeware program called RamBooster (v1.6) from cnet downloads and it solved my problem.
    Try using System Monitor and add in
    Kernel: processor usage and
    Memory Manager: Unused physiscal memory

    and you can monitor your processor and memory to see if it's either of them slowing your machine down

    Regards, Chancie



    Dimension T700r
    256 Mb RAM
    Soundblaster Live! Platinum 5.1
    Altec Lansing ADA880 Speakers
    33 Gb
    nVidia TNT 2 Ultra
    DVD 12x + Live!Drive
    MS Sidewinder Force Feedback, Freestyle Pro, Game Voice, Strategic Commander
    Windows ME
    MS Intellimouse Explorer

    Message Edited on 08/23/01 09:57PM by Chancie86

  • cls99

    13 Posts

    230

    0

    Posted August 24th, 2001 01:00

    Fonts question. I found this interesting as I was looking for the memory leakage issue also... Pass few days I am down to 15% on a few normail programs and is aggravating me. But back to fonts.... How do I bring that back down, just delete fonts randomly I don't use on there. I noticed I have 640 at present.