UNSOLVED

Kenny9438

updated

17 years ago

K

Kenny9438

10 Posts

0

23131

May 27th, 2009 16:00

Inspiron 537 power supply and video card

Will Corsair TX650W fit in to inspiron 537 case? ive heard a lot of people talking about Dell's desktop using proprietary PSU. also will the GTX 280 fit into inspiron 537?

  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    748

    0

    Posted May 27th, 2009 16:00

    Dell uses standard ATX power supplies.  At one time they did use proprietary but most systems in the last 4 years or so use standard power supplies.

    I can't answer your video question. 

    I just bought a Corsair TX750 for my home built system.  I just got it this afternoon and haven't taken the time to install it yet.  It would fit in my Dell Dimension E510.

     

    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • Kenny9438

    10 Posts

    748

    0

    Posted May 28th, 2009 09:00

    note that inspiron 537's case is smaller the dimension E510's..does that matter?

  • Kenny9438

    10 Posts

    748

    0

    Posted May 28th, 2009 16:00

    No, i do not have the 537s, i have 537. People like me who ordered inspiron 537 have to wait til the end of the month to get it.

  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    748

    0

    Posted May 28th, 2009 16:00

    Ouch! I see the 537 is actually a "537S" (compact case model).  Had you mentioned the "S" on the initial post I would have responded that it probably won't work.  You will have to physically measure the size of the power supply and then the size of a standard ATX power supply to see if it will fit. 

    Usually, with compact case models you need "low profile" PCIe/PCI cards.  You need to physically inspect the PC to determine what will physically fit in this model.

    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    748

    0

    Posted May 28th, 2009 17:00

    Oh, the Dell documents do not have the 537 listed yet since it's new.  But, looking at the picures on the sales web site, I would say it will take standard size components including the power supply.

     

    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • Kenny9438

    10 Posts

    748

    0

    Posted June 1st, 2009 20:00

    oh, so thats why i wasnt able to find any information on 537.....

  • Kenny9438

    10 Posts

    748

    0

    Posted June 9th, 2009 17:00

    What about their mobo? Will my power supply fry any parts in inspiron 537?

  • ilans1

    5 Posts

    748

    0

    Posted June 16th, 2009 06:00

    Has anyone figured out which PSU fits the 537?  I just got a video card and realized I need to upgrade the PSU on my system.  Need help!!

  • sellis02

    3 Posts

    748

    0

    Posted July 15th, 2009 15:00

    I bought a 537MT, the 537 comes in an S(slim) and MT(mini-tower) along with that I had recently bought a raidmax aurora2 700w psu, granted not the biggest or best, but plenty good enough for what I wanted. The psu was a perfect fit, and performs beautifully.  After I had ordered the 537, my old geforce 7950gt 512 ko gave out on me, so I bought a gtx260 896m core 216 superclocked video card, this thing was a TIGHT fit in the 537 case, had to replace the SATA cables with longer ones because they couldn't reach all the way over this monster card to plug into the motherboard.

    Hope this helps, though If I had it to do all over again, I would have got the slightly more costly modular psu to save from the box getting so cluttered with cables.

  • jclamar

    12 Posts

    99

    0

    Posted October 9th, 2009 22:00

    I installed an OCZ ModXSream-Pro 500w power supply in my 537 MT and it installed easily.  It was about 1/2 inch longer than the Dell 300w power supply which caused it to overlap the little clip that is behind the original power supply.  The little clip just folded out of the way, there was no need to remove it.