UNSOLVED

Redlands

updated

22 years ago

R

Redlands

25 Posts

0

8674

February 3rd, 2005 15:00

How to set up dual monitors on Dimension 3000

A friend of mine was thinking of purchasing a Dimension 3000..Specs as follows
 
Intel Celeron D Processor 320 (2.40GHz, 533 FSB)
Microsoft Windows XP Home Edition
256MB DDR SDRAM at 400MHz
Integrated Intel Extreme Graphics 2
40GB Ultra ATA/100 7200RPM Hard Drive
48x CD-RW Drive
Sound Blaster Live! 24-bit ADVANCED HD Audio
 
---
Its nothing fancy...he is simply a casual user....He presently has an older early P4 system that he had put toghether for him...He is running XP Pro and has a a dual CRT monitor set up on his current system. He is able to have multiple apps. open and move them from one monitor to the other..He would like to be able to use the same set up (as far as monitors) with the new system he may purchase. My question is can it be done with the system and specs as noted above?? If so ....
 
1. Is it better to disable the integrated video and install a AGP card that supports VGA and DVI?
If so, is it just a matter of going into the device manager and disabling the integrated card in the hardware profile and then installing the new card into the AGP slot then installing drivers?
 
2. Is it possible to use the integrated card and purchase a seperate video card for an open PCI slot?
 
Which would work better?? If the first solution is best can someone reccommend a decent card that can be purchased which would support dual monitor set up? Nothing too fancy...64 or 128 mb...Not interested in gaming ...just clear visuals. Any help would be appreciated.
 
Thanks for reading...
 

Message Edited by Redlands on 02-03-2005 12:40 PM

  • B4runo

    1 Rookie

    •

    1100 Posts

    134

    0

    Posted February 3rd, 2005 16:00

    Redlands:

    Your friend has a great opportunity, to get a new machine.  You should refer him to this Dell system comparison chart:

    http://www1.us.dell.com/content/topics/segtopic.aspx/compare_dimen?c=us&cs=19&l=en&s=dhs .  He may find that he would be better served by getting more than a D3000.  It is what it is, an entry-level system based upon older technology, with quite limited expansion capabilities.  A quick review of recent postings on this forum will reveal the deluge of assorted 'challenges' with the integrated graphics.  The Video FAQs, at the top of the forum page, have instructions on disabling the onboard video.  The D3000 utilizes PCI cards.   If I were in the market for a new machine, I would look for one with a PCI-Express video card slot, due to more available options (including dual monitor support) .  But I wouldn't buy a new machine with only a PCI slot.  A check of this link will identify a poll of "best video card upgrades": http://forums.us.dell.com/supportforums/board/message?board.id=dim_video&message.id=101659#M101659 .  

    Another point to consider, WinXP works a lot better with at least 512k of RAM.

    Good luck, :smileyhappy:

    B4runo

    DIMM 4400
    BIOS – A06, date 6/12/02
    Win XP Home Edition, SP2
    Pentium-4 2.8 GHz, 400MHz FSB, 512K L2
    1 GB DDR SRAM PC2100
    80 GB 7200 RPM Ultra ATA Hard Drive
    Iomega 80GB USB 2.0 External HDD
    XFX GeForce FX 5700LE 128MB DDR 8X AGP w/ TV & DVI
    17”, 1702FP Digital Flat Panel Display
    Belkin F5U508 USB 2.0/Firewire PCI card

    Utilize the "Advanced Search" function at the bottom of the page before posting. You may find the answer to your question from a previous post. 

  • MenFerret

    30 Posts

    134

    0

    Posted February 3rd, 2005 17:00

    There are PCI vid cards that support dual monitors (and the 3000 can only use PCI cards). As mentioned above the 3000 has basically no future upgradeability, but if all he needs is a basic box that can support 2 monitors, it can be done.

    ~Ferret~