UNSOLVED

bigdaddy121

updated

17 years ago

B

bigdaddy121

1 Message

0

4334

November 29th, 2009 08:00

hi I am new to this forum and I have a challenge that I can not get an answer to

My question I am a student in baker college and I can not find information that states that by keeping a desk top computer dust free will save a certain amount of life expectancy on a computer that is allowed to get dust in it and is not cleaned.

  • TheRealFireblad

    4 Apprentice

    •

    4639 Posts

    220

    0

    Posted November 29th, 2009 09:00

    Welcome to the forums :emotion-21:

     

     

    It's common sense really, that something which is looked after, will undoubtedly last longer than something which isn't :emotion-55:

    That analogy includes computers - be it a desktop system (PC), or a laptop.

    A clogged-up system will inevitably start showing signs of trouble - i.e. 'freezing', +/or restarting for no apparent reason.

    A primary cause of such issues is overheating... caused by dust build up.

    It's important therefore, to clean the system occasionally, paying particular attention to the intake/exhaust the fans.

     

    So yes... keeping dust accumulation in a system/laptop to a minimum, will usually help prolong the life expectancy of the components inside it :emotion-5:

  • tester27

    14 Posts

    220

    0

    Posted November 29th, 2009 14:00

    Two of the largest concerns (issues) for any electronic component (or an assembly) is dirt(dust) and excessive high temperature of exposure. Everything  has a finite expectancy of operation (life cycles are calculated based on an average condition of that environment) but if a component is subjected to a higher level of dirt/dust than it was designed  it will shorten its life. Covering a component with higher level of dirt/dust reduces that heat transfer thus it reduces its level of operation. When a processor is exposed to very high operating temperatures it will ramp down its clock speed to prevent further damages to its substrates and effectively its architecture. In today's high performance pc race, great amount of engineering is applied to ensure that all the excess heat is removed very quickly and efficiently if a whole system is to operate at its optimum level. There isn't a cheaper way to ensure a great and long operation of your pc BUT to make sure that it operates with the least amount of inside dirt/dust over its heatsinks/fans and all other components.

    An analogy to humans would be the level of work one may carry when the ambient temperature is 20 deg C versus an ambient temperature of ..say 40 deg C. You will agree that in the same amount of time one will produce more work in cooler environment than that where temperature are exceedingly high.

    Remember, an ounce of prevention is worth a pound of cure is very true to this application. Spend five minutes every month and make sure to clean your pc inside. You'll be glad you did.