UNSOLVED

rid21481

updated

21 years ago

R

rid21481

29 Posts

0

449

November 4th, 2005 19:00

helpi'm desperate!!

Not sure which forum this goes on.  Trying to turn on my computer and initial monitor reads no signal input, then i get the black screen with all the startup choices if i try normal set up the screen flashes then no signal input on monitor then windows logo startup then no signal input and the power light goes off on the monitor.  Can't boot from xp cd as i can't set my bios to read cdrom first, if i have my xp cd in nothing different happens.  try starting in safe mode and nothing happens, if i bang on the keyboard i can get safemood to boot 1 out of 6 tries or so and then everything seems ok but if i go to restart i get check disk, finds no errors and the same abouve senario starts all over again.
 
  • Georgia_Rebel

    1 Rookie

    •

    409 Posts

    73

    0

    Posted November 4th, 2005 19:00

    pull your video card out and then reseat it..and while your in the case check all the connections to be sure none have worked loose...check all connections on the back of the machine also...I have seen the no signal error a few times  my self and each time is was the video card had worked loose.....also check the prongs on the cable between the computer and monitor..be sure no bent pins or broke pins...thats has happened to me one time before...I had to order a new cable and that fixed it.....
    .
  • shesagordie

    12 Elder

    •

    46017 Posts

    73

    0

    Posted November 4th, 2005 20:00

    rid21481.
     
    It helps to post the computer model and version of windows.
     
    Bev.