UNSOLVED

kja3

updated

26 years ago

K

kja3

14 Posts

0

360

November 9th, 2000 22:00

Hard drive format

I need to format my hard drive. I've backed up all important files on a cd-rw and
have made a Windows 98 Start-up disk. After I run the format c: comand, will the
disk drive still be able to read the Windows CD?
  • Goonboy

    2 Intern

    •

    2433 Posts

    156

    0

    Posted November 9th, 2000 22:00

    kja3;

    You should find all the answers you need here.

    Good luck!



    Shortcut to DellT@lk users FAQ Web Site. Will open in a new window.


    "Life is too important to be taken seriously."
  • Dr.PC

    11 Posts

    156

    0

    Posted November 11th, 2000 00:00

    Do not format your harddrive from the C: command.
    Use a boot disk and format from the A:format C command.
    The best thing to do if you are about to strip
    your PC naked and then reload your operating system is to get this
    file from Dell. It is called CDENAB.EXE...
    It will debug your hard drive by removing the partitions. You then must perform
    fdisk and then format. This file is downloaded to a disk and it contains
    everything that you will need to boot your
    machine and perform a good, clean healthy install.
    Get the directions on how to use this program before you
    begin. This is the program recommended by Dell Tech support.
    As a matter of fact I used it on November 8th to reformat
    and load my operating system. My system screams now..