
UNSOLVED
gx270 loses video signal
service tag # c1mkw31
User is a radiology transcriptionist, she will be in the middle of transcribing lengthy rad reports and the screen goes black, light on monitor goes to amber, but the PC is still running. Swapping monitors doesn't help, still no video feed.
Have to reset the PC, then it works again for a time, but always happens again. I pulled this machine and have it on my bench, left it on without any activity, just sitting at a login screen, I get the same error.
Responses (25)
Solutions (0)
- Now the machine doesn't have a video signal long enough to finish booting into the Windows login screen.This is a brand new hard drive and fresh install of a known good image.The machine doesn't reboot or shut off, there is a "clicking" sound and I lose video while the waiting for Windows 2000 login screen to appear.???
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
323
0
Posted January 21st, 2005 16:00
Bonker77,
For testing,
* Right click anywhere on the desktop
* Click Properties
* Click the Screen Saver tab
* Choose None
* Click Apply
* Click the settings or Power button to the right of the globe
* You should be on the Power Schemes tab
* Under the heading Power Schemes choose Home/Office Desk
* Under Settings for Home/Office Desk
- set the monitor to never
- set the hard disks to never
* Click Apply
* Click the Advanced tab (if listed)
remove any checks
* Click Apply if you made any changes
* Click the Hibernate tab
remove any checks
* Click Apply if you made any changes
* Click OK
* Click OK
* Click Start- Turn Off Computer- Restart
What happens?
DELL-Chris M (old account)
#IWork4Dell
- I work on a site with several hundred optiplex desktops. We have replaced more than 20 GX270 motherboards for this exact problem. 10 over the last 9 weeks.We experience this loss of graphics at various points of POST and operating system boot. We have to replace the motherboard in each case. We are looking through the history of warranty parts requests to see if it was a batch problem.Col.
MedexDavid
5 Posts
253
0
Posted March 13th, 2005 17:00
I was having the exact same problem, it is the capacitors on the mother board. They were domed shaped. Dell even told me it was a software issue and I needed to reformat the drive, go figure, ha, ha, ha.

Bonker77
19 Posts
323
0
Posted January 21st, 2005 16:00