UNSOLVED

barrance

updated

21 years ago

B

barrance

31 Posts

0

15206

July 5th, 2005 15:00

Frying BFG 6600GT cards left and right in my 4700

Alright, here is the abbreviated story which starts 3 months ago...
 
After struggling with the x700 pro initially with my 4700, I switched to the BFG 6600GT PCI-e.  That card worked fine with BFV but with Farcry, I would get crazy coloring artifacts.  One night after playing for roughly an hour, the computer shuts down and would not start with the vid card plugged in.  I was able to get the computer on by removing the card.  I have a suspicion that I have already fried the card at this point.
 
After contacting tech support (both BFG and Dell), it was suggested that the power supply might be insufficient.  I added 2 sticks of ram, a second DVD drive, and a few USB devices to the comp.  So I go out and get an Antec 500w PSU and plug it in with out the video card to test it out and it works.  I plug the video card in and all of a sudden, I hear this crazy buzzing sound and I see smoke coming out of the vid card!.  So I return the card and BFG sends me a replacement.
 
I plug the new card in and lo and behold, it works!  I was able to get everything running and even played the demo for BF2 for a few minutes.  However, 10 minutes into the game, on high video settings, the computer shuts down again.  This time, when I hit the power button, I hear the buzzing noise again, a big puff of smoke comes out of the computer, but the computer boots on.  Of course, I can't see anything until I plug the monitor into the integrated graphics port. 
 
So basically, I am running on the integrated video again, having already fried 2 BFG 6600GTs (thank goodness for lifetime warranties).  While BFG has been good about the replacements, I doubt they will keep sending me new cards if I keep frying them.  Does anybody have any idea what the problem could be?  My last course of action is to buy a new case and motherboard.
 
The specs on the comp are P4 2.8gHz, 1GB DDR2, 80 GB SATA, integrated sound and video, Antec 500w PSU.
 
Thanks!
 
  • B4runo

    1 Rookie

    •

    1100 Posts

    690

    0

    Posted July 5th, 2005 16:00

    Is your machine generating a lot of heat?
  • barrance

    31 Posts

    690

    0

    Posted July 5th, 2005 16:00

    I can't tell really.  I suppose it might be.  With the first video card, I was idling at ~50C, but this time around, it was a little warmer.  I'm guessing it might have been due to the new PSU since it's 500w.  It has 2 fans, but one of them doesn't turn on until it gets warm enough. 

    When I was testing it out, I ran the BF2 demo for a few minutes and checked the temp right afterwards and it was at 66C.  This was after only a few minutes.

    I took the modem out so there is nothing directly underneath the video card.  I was going to install a pci exhaust fan, but I didn't have a chance to.

  • B4runo

    1 Rookie

    •

    1100 Posts

    690

    0

    Posted July 5th, 2005 17:00

    barrance:

    The two obvious potential problem areas are power and heat/ventilation.  Your new PSU rules out the potential power issue, so it would seem that heat/ventilation is the only obvious suspect remaining.  There are numerous past postings about ventilation issues with the D4700.  Using the term "4700 heat" in the search function, revealed this thread (from among many), that may be of use to you: http://forums.us.dell.com/supportforums/board/message?board.id=dim_video&message.id=99914&query.id=182274#M99914 .  You should consider reviewing past forum postings for more info.

    Other forum members may have other ideas.  I hope you resolve your issue and are able to enjoy your machine.

    Good luck,:smileyhappy:

    B4runo


    DIMM 4400
    BIOS – A06, date 6/12/02
    Win XP Home Edition, SP2
    Pentium-4 2.8 GHz, 400MHz FSB, 512K L2
    1 GB DDR SRAM PC2100
    80GB WD 7200RPM, 200GB WD 7200RPM EIDE/ATA HDDs
    Iomega 80GB USB 2.0 External HDD
    Pioneer DVR-109BK, Samsung DVD-ROM SD-616R
    Leadtek GeForce 6600 GT 128MB DDR 8X AGP
    17”, 1702FP Digital Flat Panel Display
    PCP&C Turbo-Cool 425 Deluxe Dell PSU
    SIIG US2275 USB 2.0 / 1394a / NIC PCI card
    Courteous Dell Community Forum members search first, then post.
  • speedstep

    11 Legend

    •

    46969 Posts

    690

    0

    Posted July 5th, 2005 19:00

    Does the 6600GT not like 1.5v signaling on the AGP bus? If so the card is not up to AGP spec because 4x is supposted to allow 4x or 8x with the caveot being that 8x cards will accept 1.5v 4x signaling.
  • df96817

    83 Posts

    690

    0

    Posted July 5th, 2005 20:00

    Wow, you got an Antec PSU to work with your Dell? I thought that Dell computers can only use a certain kind of power supply? Guess you're lucky... 

    BTW, isn't there a switch on the back of the PSU that the Dell case can't compensate for?

    Message Edited by df96817 on 07-05-2005 04:30 PM

  • barrance

    31 Posts

    690

    0

    Posted July 5th, 2005 20:00

    Not that I could tell.  It was a pretty easy swap actually.  Just unscrewed the old PSU, unplugged the cables, moved the big green air tunnel, and put the new one in.  Everything worked fine too for a few minutes until I started playing BF2 on high res.
  • barrance

    31 Posts

    690

    0

    Posted July 5th, 2005 20:00

    My card is a PCI-e card, so it sits in the PCI-e 16x slot.  Do you know if there are any issues that could be related to that slot?
  • CSPlayer089

    563 Posts

    690

    0

    Posted July 5th, 2005 21:00

    try a PCI slot fan, or a VGA cooler for the 6600GT from Arctic Cooling
  • 690

    0

    Posted July 6th, 2005 02:00

    Barrance,

    I think this has to do with the PSU, Dell PSU's are tricky & you cannot simply replace it with any old PSU.

    I have a Dimension 8300 2.8GHz P4 with a BFG 6800 GT OC, I upgraded the PSU from one that came from pcpowercooling.com, they custom make PSU for Dell units, they also slot right in. I think this is the problem you have, the PSU you have replaced may not suit for the motherboard you have. I nearly made the exact mistake, lucky I didn't, now I know what will happen.

    All I know is, not BFG card that is the problem, its the PSU, or you have connected something incorrectly.

    Go to this link: http://www.pcpowercooling.com/products/viewproduct.php?show=S47D

    This PSU has your name all over it.

    PS: I fear you may have fried a lot more than the video card aswell, I would be careful.

     

    Good Luck

     

  • Brainonska511

    1122 Posts

    581

    0

    Posted July 6th, 2005 03:00

    Weatherman1:

    If you take a look at the back of a Dimension 4700, it appears you can stick in a retail PSU in there since there is an open back where the PSU is.