
UNSOLVED
Exhaust Fan Specs....Please help
After searching all threads applicable, I have not found my answer so here is the question:
What size exhaust fan should I buy? One thread states 100-120mm at a glance, but I would like to know who has installed an exhaust fan on their XPS 630 case?
Please let me know if there is an exact spec for the exhaust fan.
Thank you,
JS
Responses (10)
Solutions (0)
billybigfoot
287 Posts
690
0
Posted July 10th, 2008 06:00
- Thank you all for the help. I wanted to be able to know the size, as my new XPS 630 is being delivered by FedEx tomorrow sometime. I cannot wait to be able to play the games I have at a high setting. I can't even play COD 4 at all as my current rig doesn't fit the min sys req. Thanks for the help.
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
690
0
Posted July 10th, 2008 22:00
ghstrydr,
We have several software (bios, ESA) fixes coming that address the fans and colored LEDs. Until we release them, do not adjust the fans using NvPerformance. Just load your games and play. Check back on this thread for my announcements about the new stuff.
DELL-Chris M (old account)
#IWork4Dell
Thanks Chris. I was questioning what size fan fits as an add on for an exhaust fan to the rear of the case. It looks like someone stated a 92MM fits. I should take delivery tomorrow of my 630, but from the many threads I have read, this case does not come with an exhaust fan in the rear, which kind of baffels me. I appreciate your quick response, but I must have stumbled onto some other issue that I was unaware of, by the sound of things. With the minor overclocking that I would like to do with this new 630, I thought that it would be wise to add an exhaust fan and upgrade the cpu's heatsink.
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
690
0
Posted July 14th, 2008 13:00
ghstrydr,
My XPS 630 is overclocked and runs fine with only the stock cooling hardware.
DELL-Chris M (old account)
#IWork4Dell
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
690
0
Posted July 14th, 2008 14:00
Shark1217,
Those dates are not in stone. I just emailed you 1.0.7.
DELL-Chris M (old account)
#IWork4Dell
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
54
0
Posted July 14th, 2008 16:00
Shark1217,
Use ours.
DELL-Chris M (old account)
#IWork4Dell
- Dear Chris,
Thanks for the Bios. 1 question. I unistalled 6.02 performance, monitor and update. Should I use that one or should I use the one posted here?
http://www.dellcommunity.com/supportforums/board/message?board.id=Tech_Talk_XPS&thread.id=68468
Thanks

MoneyGuyBK
2 Intern
•
2294 Posts
690
0
Posted July 10th, 2008 05:00
ghstrydr; Welcome to DCF
I have a XPS720, and the correct size for my Beast is 120mm... see here
But I believe the 630 requires/fits a smaller size?
The easy way is to measure it for yourself... although I am sure a 630 owner should chime in by tomorrow.
Peace