
UNSOLVED
End user review of 6600GT AGP
You won't find any benchmark scores here or any scores for that matter. I just got my BFG 6600GT OC 128mb today. (About 6 hours ago) I have been trying it on a number of games. (Doom3, MoH Pacific, Battlefield Vietnam, Call of Duty UO, & Painkiller) All I can say is WOW! That's actually not all I can say.
This card has given new life into my somewhat tired Dim 4400. I am now able to see what all the hype for the graphics of these new games was all about. I had been missing soooooo much with my FX5200. I was a little tense about spending the $$$ w/o knowing if the card would fit, much less work, in my system but after a 15 minute install I was up an running. No PSU problems. No fan alerts. I have been able to play all the above games @ 1024x768, settings on high for most with no lag except for MOH pacific had to drop the decals and go with medium textures. (Oh darn) I played for about 5 hours straight with no problems. The BFG does sort of require that you keep the PCI slot below the AGP card open. The cooling solution is somewhat large. You could cram it all in there but may see ineffective cooling.
If you are considering this card I say Get It. It is da bomb! Also just FYI: If you are going to get it and are currently using a Geforce; dump your old driver and install the latest one from Nvidia's site prior to installing card then you'll be set for Plug & Play with only your Nview settings to take care of. As for the power cable you may be wondering about, my 4400 had a spare unused and unchained cable that was just the perfect length to fit. BFG and most card mfg state that the power supply going to the video card should not be spliced or used for anything, but the card. So as long as you don't have your machine loaded down you should be good.
That's it for now. I'm going back to gaming. I'll post again if my puter catches on fire or I start having problems.
Dim 4400
P4 2.84G (upgrade from 1.7)
1024 mb PC 2100
BFG Geforce 6600GT OC AGP>so sweeeeet!
SB Live!
CDRW
DVD
21" Panasonic E110 CRT
This card has given new life into my somewhat tired Dim 4400. I am now able to see what all the hype for the graphics of these new games was all about. I had been missing soooooo much with my FX5200. I was a little tense about spending the $$$ w/o knowing if the card would fit, much less work, in my system but after a 15 minute install I was up an running. No PSU problems. No fan alerts. I have been able to play all the above games @ 1024x768, settings on high for most with no lag except for MOH pacific had to drop the decals and go with medium textures. (Oh darn) I played for about 5 hours straight with no problems. The BFG does sort of require that you keep the PCI slot below the AGP card open. The cooling solution is somewhat large. You could cram it all in there but may see ineffective cooling.
If you are considering this card I say Get It. It is da bomb! Also just FYI: If you are going to get it and are currently using a Geforce; dump your old driver and install the latest one from Nvidia's site prior to installing card then you'll be set for Plug & Play with only your Nview settings to take care of. As for the power cable you may be wondering about, my 4400 had a spare unused and unchained cable that was just the perfect length to fit. BFG and most card mfg state that the power supply going to the video card should not be spliced or used for anything, but the card. So as long as you don't have your machine loaded down you should be good.
That's it for now. I'm going back to gaming. I'll post again if my puter catches on fire or I start having problems.
Dim 4400
P4 2.84G (upgrade from 1.7)
1024 mb PC 2100
BFG Geforce 6600GT OC AGP>so sweeeeet!
SB Live!
CDRW
DVD
21" Panasonic E110 CRT
Responses (4)
Solutions (0)
- The card comes with a 6", 4 pin, 12v Y cable that you plug into the one free 12v cable you should have in the Dell. You can tell which one; just trace it back and you'll see that it goes back to the PSU solo. The others have secondary plugs spliced in for 2 HDD or 2 optical drives. This is provided you don't have some other 12v device using the plug in that case I would use the Y connector and plug the other end into a device that you won't be using much while gaming. ie: the CD drive that you don't use during gaming or spare HDD. That way you won't over load the PSU. Remember the 6600GT recommends a 350W PSU so you'll be pushing your Dell to the max. So far I have not encountered any problems. I was gaming for about 6 hours solid with no rest for the 6600GT and had no lag, lockups, crashes or the like. I'm not to worried though the BFG comes with a lifetime warranty.
I got the card @ chumbo.com They only had the BFG model. It was $254 delivered Fedex overnight. Shipping was only $5. Shipping is free if you can wait 3-5 days' but for only $5 I said "gimme it now"
Included in box are:
1) The 6600GT OC (this one is overclocked out of the box and still has a lifetime warranty.)
2) driver & manual on CD
3) nDVD, DVD decoder
4) 3 game demos: splinter cell, silent storm, & painkiller
5) Ulead video studio 7 se DVD (what ever that is?)
6) DVI>> VGA dongle (not needed there is 1 VGA port, 1 DVI port,& 1 Svideo on card)
7) 6" 12v 4 pin Y cable
I'll let you know if I smoke the card but so far so good. Oh I did dump my 56k modem giving me 2 free PCI slots. I kept the PCI blower I've been using in it's place. I have that plugged in w/ my 2nd HDD which is used very little. If you remember I was the paranoid one after my CPU upgrade. My wife is gonna kill me when she sees I spent more on my machine. Oh well, it's worth it ...I think...lol
Dim 4400
P4 2.84G (upgrade from 1.7)
1024 mb PC 2100
BFG Geforce 6600GT OC AGP>so sweeeeet!
40G WD HDD
45G WD HDD
SB Live!
CDRW
DVD
21" Panasonic E110 CRT Thank you so very much for the information. Most helpful. I'll give that card a try now and will report back as well. Again, thanks
Dim 4400 ( June 2002 )
2.6 ghz (upgrade from 1.7 ghz)
768 MB 2100 DDR Memory
Gainward Ti 4200 128 MB Nvidia
XP Home plus SP-2
17 inch Dell LCD monitor (1703 FP)
48 X CDRW- How's the temperature on your 6600GT AGP? Do you use any extra cooling things to keep it down? What should be considered a safe range when playing 3D games?When I'm playing Need For Speed Underground 2 for a while, it goes up to around 75, which I'm a little concerned. It goes back to around 58C pretty fast though after I quit the game. When I'm playing Lord of Rings, battle for middle earth, it doesn't go above 70C though.But I read some other people say that their 6600GT AGP remains pretty cool at around 45/65 for idle/burn. I'm wondering whether mine has any problem...Thanks~

SR45
2 Intern
•
12138 Posts
78
0
Posted December 3rd, 2004 21:00
Ok, tell use that need this information. You have to connect the molex cable to the card and where did you connect the other ends to ? Do you see any down side at this time playing any of the games ?. Any heat issues ? Where did you buy the card and did it come with the power cables ?
Thanks
Dim 4400 ( June 2002 )
2.6 ghz (upgrade from 1.7 ghz)
768 MB 2100 DDR Memory
Gainward Ti 4200 128 MB Nvidia
XP Home plus SP-2
17 inch Dell LCD monitor (1703 FP)
48 X CDRW
Message Edited by SR45 on 12-03-2004 05:53 PM