
UNSOLVED
C
ColdMachineUK
7 Posts
0
3804
April 19th, 2007 14:00
Dimension 9100 + X1950Pro?
Hi, I have a (fairly old) Dimension 9100. The PSU is rated 375W according to the manual. I wondered if anyone knew whether I can upgrade the existing ATI X600 card with a new ATI X1950Pro card? I'm looking at the Sapphire X1950Pro specifically. Can the case fit this card, and will the psu be able to support it?
Responses (3)
Solutions (0)
ColdMachineUK
7 Posts
163
0
Posted April 21st, 2007 08:00
Great! I really appreciate the reply. I had read somewhere that Dell PSUs were actually pretty good because the v rail rating is decent. I read that a lower PSU wattage was offset by the volt rail rating (i.e. that a low v rail rating on a 400W psu would be worse than a higher one on say a 300W psu etc.). I will go with the X1950Pro then, and see what happens! Another quick question though: does the onboard memory for a gfx card affect the psu usage? I.e. would a 256MB card need less power than a 512MB card, or is this totally irrelevant?ilikedonuts
11 Posts
163
0
Posted April 23rd, 2007 04:00
Sorry, I have no idea. All I can say is, my system has absolutely no trouble with the 512MB X1950pro - bearing in mind that I only have a single hard drive, a 3.5" floppy, and two optical drives. Still, I don't think you'll have any trouble at all with the new card.

ilikedonuts
11 Posts
163
0
Posted April 21st, 2007 02:00