UNSOLVED

island boy

updated

20 years ago

IB

island boy

1 Message

0

3553

March 16th, 2007 16:00

dimension 8250 and ATI 1650 video card

I have seen a similar problem as I am having posted. Old video card fan going out. Buy new video card: VGA DIAMOND X1650AGP512SB R. When i installed it nothing happened. The machine powers up, the video card fan starts but the monitor gets no signal and the system does not completely start.
 
The LED's on the back give me the following reading GGGY.
 
Would there be a problem with the AGP version? What version does an 8250 from January of 2003 have?
 
New cards are 4 and 8. Would my system have 1 or 2?
 
I plan to RMA the Diamond ATI and get a NVIDIA GeForce 7600Gt agp, but if the AGP version is the problem i would need to find an older card to install.
 
Of course I might not know what I am talking about.
 
Any assistance would be helpful.
 
 
System specs
Dimension 8250
P4 2.8
512 mg RAM
RADEON 9700
 
  • delta7000

    2 Intern

    •

    454 Posts

    153

    0

    Posted March 16th, 2007 18:00

    I installed the ATI X 1650 Pro in my 8250 about a 4 months ago and have had no problems.  I previously had a ATI 9700PRO. I'm running 2 monitors (2405FPW & 1900FP). I still have the stock 250W PSU. I did up date to the latest catalyst drivers. I'm just wondering if the problem arises with 1650 cards not made by ATI (AMD). I only needed to insert the card and connect 1 wire. I'm certainly not an expert on this and SR45 is a lot more knowledgeable on the subject.
  • SR45

    2 Intern

    •

    12138 Posts

    153

    0

    Posted March 16th, 2007 18:00

    Do a simple research on this forum and you will find countless threads on the problematice X1300  X1400 and X1600 series ati cards on a older dell system.  Dump the card, get the 7600 GS or better GT instead. 
  • SR45

    2 Intern

    •

    12138 Posts

    153

    0

    Posted March 16th, 2007 20:00



    delta7000 wrote:
    I installed the ATI X 1650 Pro in my 8250 about a 4 months ago and have had no problems.  I previously had a ATI 9700PRO. I'm running 2 monitors (2405FPW & 1900FP). I still have the stock 250W PSU. I did up date to the latest catalyst drivers. I'm just wondering if the problem arises with 1650 cards not made by ATI (AMD). I only needed to insert the card and connect 1 wire. I'm certainly not an expert on this and SR45 is a lot more knowledgeable on the subject.



    Glad to hear that at least one has had good luck with the card on their 8250.  :smileywink:  Sorry for the many who have not.  I think even ATI announced that many older dell systems were having issues and a possible fix was in the works, but cannot find the link to that thread.