
UNSOLVED
Dimension 4600 fan shifts into hyperdrive. LOUD!!!
Recently my Dimension 4600 fan has begun to shift into hyperdrive. At least, that's what I assume is happening, because it's much louder than it used to be. It almost sounds like two fans running. If I reboot, it's quiet for about 5 minutes (normal fan noise) and then it kicks in. There are no mechanical grinding noises, ie. it doesn't sound like anything is broken, it's just so much louder. We can here the Dell 3 rooms away.
It is getting warmer here, but it was this warm when I had it last summer, so I don't think the fan is just reacting to the heat...
Any suggestions? Is my fan on the verge of death?
It is getting warmer here, but it was this warm when I had it last summer, so I don't think the fan is just reacting to the heat...
Any suggestions? Is my fan on the verge of death?
Responses (4)
Solutions (0)
Of cousre fan speed changes depending on what you are doing, the harder you put it to work, the faster things heat up, the faster the fan goes to cool things down or to keep at stable temps.
But if the fan is doing this and you are not doing anything, more than likely your fan is failing and it needs to be replaced, this is a common issue in Dell computers
shesagordie
12 Elder
•
46017 Posts
127
0
Posted June 8th, 2005 22:00
Stegi.All you can basically try, is to open the case and give the fan and heatsink, a thorough cleaning with compressed air.
If this fails to stop the noise and your system is under warranty, then contact Dell's Technical Support for a replacement unit. If not then you can buy a replacement fan from Dell Spare Parts Phone 800-999-3355 Ext 69937. The Dell case/processor fan is a proprietary unit.Bev.409industries
17 Posts
127
0
Posted June 21st, 2005 20:00
Anyone find a solution to this problem? i am having the same EXACT thing
(my thread) http://forums.us.dell.com/supportforums/board/message?board.id=dim_other&message.id=237928
Ill give it a good cleaning, but i doubt thats the problem as i have cleaned it before... help!

Stegi
1 Message
127
0
Posted June 6th, 2005 21:00
could you solve the problem? and if yes I would be glad to learn how!
thanks much in advance!