UNSOLVED

pvr02

updated

22 years ago

P

pvr02

37 Posts

0

18690

September 27th, 2004 06:00

Dimension 4600 doesn't turn on

We were working on the computer a day or two ago.  We shut it down for the night and went to bed.  The next day or the day after we tried to turn it on again and it just plain won't turn on.  No drives get power, no fans spin, etc.  Anyone have this problem before?
  • 338

    0

    Posted September 27th, 2004 11:00

    I have a Dimension 2400 doesn't turn on. Worked one day not the next. Just get flashing amber light on power light.

    Any ideas for solving the problem please let me know

  • Gilgamesch

    54 Posts

    338

    0

    Posted September 27th, 2004 12:00

    Just had a 4600 with a similar problem.  If I turned the computer off for any period of time I would have to push the power button numerous times over several minutes before it would turn on. Fortunately it was still under warranty and Dell sent out a tech. to solve the problem. He was a little vague on what was wrong, but I believe it ended up being a faulty power supply.

     

    Phil

  • Gilgamesch

    54 Posts

    338

    0

    Posted September 27th, 2004 13:00

    Actually I did all my support work via e-mail. In my case they responded quickly and when they could not solve the problems they arranged for a tech to come out and work on the computer.

     

    Phil

  • DeedleDog

    2 Posts

    338

    0

    Posted September 27th, 2004 13:00

    I'm having the exact same problem with my 4600.  For about 2 weeks it decides when it wants to turn on and not turn on.  No power at all.  No lights anywhere.  It worked when I went to bed, and now hasn't turned on for 2 days.  I tried different plugs and stayed with the phone support for 2 hours the other day.  We're trying again today to get it going.  The language barrier only lets me hang with the support people for a max of two hours!  (I go crazy).  Today the support guy will have me fiddle with the insides of the computer.   Let me know if you solve this problem!
  • pvr02

    37 Posts

    338

    0

    Posted September 27th, 2004 17:00

    Here is what I have tried so far:

    • Took the motherboard out and tested it for a grounding issue
    • Used a known good power supply
    • Reseated all cards and cables
    • Tried using a screwdriver to turn it on instead of the cables
    • Used a new black power cord from outlet to pc
    • Jumped the powersupply and it turns on

    I am pretty much out of ideas except that the motherboard went bad.  But that's kind of hard to believe considering other people are also having this problem.

  • pvr02

    37 Posts

    338

    0

    Posted September 28th, 2004 05:00

    After doing even more reasearch today I managed to figure out that Dell uses a propritary PSU.  I knew that the PSU's usually  have a different size and don't have the same mounting holes as regular ones.  Then I managed to figure out that Dell actually rewired the powersupply.  So I still need to test it with a different one.  However I don't have any space Dell PSU's laying around.  Is than an adapter that will work with the Dimension 4600?
  • earthling30

    40 Posts

    338

    0

    Posted September 28th, 2004 06:00



    After doing even more reasearch today I managed to figure out that Dell uses a propritary PSU.  I knew that the PSU's usually  have a different size and don't have the same mounting holes as regular ones.  Then I managed to figure out that Dell actually rewired the powersupply.  So I still need to test it with a different one.  However I don't have any space Dell PSU's laying around.  Is than an adapter that will work with the Dimension 4600?

    I don't think that they have used propritary PSU's for some time now. I have a 4550 with a standard (although weak) PSU and I've tested it to make sure.

    What happened when you did the following?

    • Took the motherboard out and tested it for a grounding issue
    • Used a known good power supply
    • Reseated all cards and cables
    • Tried using a screwdriver to turn it on instead of the cables
    • Used a new black power cord from outlet to pc
    • Jumped the powersupply and it turns on

    Did it come on each time? If so, then it could be related to the front panel of the case all the way to where it hooks into the Motherboard. Just my $.02.


     

  • DeedleDog

    2 Posts

    338

    0

    Posted September 28th, 2004 11:00

    After speaking with India and Texas over several calls and many many hours, they decided it won't turn on due to a bad motherboard.  They are sending someone out to replace it.  I think your diagnosis was right!  Whew!  With one month of warranty left!

     

  • pvr02

    37 Posts

    338

    0

    Posted September 28th, 2004 13:00

    When I did each of the following it did nothing.  Didn't turn on.  No drives got power, no fans turned on, no display and no post.  This desktop is out of warranty so Dell wont replace it.
  • pvr02

    37 Posts

    165

    0

    Posted September 28th, 2004 13:00

    I just checked the PSU's and they are identical.  They used a standard one.  I'm stumped at what the problem could be.  The only thing I can think of is the mobo.  Anyone else have any suggestions?