UNSOLVED

RickWinger

updated

20 years ago

R

RickWinger

37 Posts

0

5275

April 2nd, 2007 12:00

Dimension 4100 upgrade questions

I am interested in a faster computer and some other changes and am considering what upgrades can be done on my Dimension 4100.
 
Specifically, I want to know if I can gut the case and:
- Install a new motherboard and processor?
- Install a 500W power supply?
 
From there I would reinstall my existing floppy, CD burner, USB added-on ports, etc., and then just truck along faster than before.
 
I'm not burned out on Dell.  Instead, I'm just interested in the challenge of doing my own rebuild chores and would prefer to use my existing case if possible.
 
So any upgrade tips would be appreciated, along with cautions for things to avoid.
 
Thanks in advance,
Rick
 
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    147

    0

    Posted April 2nd, 2007 12:00

    Anything is possible given enough time and effort. Basically, you'll be replacing everything but the case. Doing so will require extensive modifications to wiring, etc. all for the sake of saving a case worth $30 at most. Plan on buying a new, standard case -- you can buy any number of great ones for $50 -- and basically building your own system. Almost every current board has onboard network, USB, etc., and if you have plans to use anything near current, you'll need all new RAM. You will also need a new video card. You can save your optical drive, floppy, keyboard, mouse and monitor - everything else will need to be new.
  • RickWinger

    37 Posts

    147

    0

    Posted April 2nd, 2007 16:00

    Thanks for the response.  I guess could change the RAM (for something faster) and possibly squeeze a bit more speed out of my existing desktop, but otherwise it is maxed out.  And I don't think the fastest RAM for this unit would move to a new motherboard -- which means changing the RAM would not be a dollar-wise move.
     
    Soooo ... I think I'll do better to take a little longer and accumulate the parts for a home build job and just leave this one running as is.
     
    Thanks again.  You covered my basic questoin.
     
    Rick