
UNSOLVED
DJ
Diesel Jay
3 Posts
0
2073
May 9th, 2003 16:00
Dim 8200 -- New Power Supply // Still No Power
OK, here's the situation!
Last week, while running normally, my Dim 8200 desktop just powered down and wouldn't power back up. We called Dell Tech Support and the tech was fairly certain this sounded like a bad power supply.
So, we ordered a new PS. Got that installed today, and still no power! What's odd is that the green power light on the motherboard lights up, and stays lit, along with the 100Mbit light on the NIC card. No amount of fiddling with the power switch will turn the machine on, though. None of the 4 LED's on the back panel ever light up, for any color. I've swapped outlets, cords and am not using a power strip. I've pulled all the cards & memory, along with every device in the system such that it was only the motherboard, processor and power supply in there. I disassembled the case and checked the power switch, the cable to the I/O board and the cable from the I/O board to the motherboard. Even pulled the BIOS battery thinking that there might be a bad or corrupted BIOS setting. No dice.
What's interesting is that I can plug in the old "bad" power supply, and I get the motherboard light and NIC light on. However, neither the old PS or the new one will turn the machine on.
So, any ideas? Could both Power Supplies be bad and still light up the motherboard and NIC light? This system is not under warranty, so this is all on our dime, and I need some direction.
Thanx & Best Regards,
Jay
Responses (4)
Solutions (0)
- Hey Jay.
I think i know exactly what is wrong. Suprise! You have a case called, "your processor is dead jay!" Heres my situation. I had a dell Dim 4300 and broke the handle on the motherboard that goes to the processors socket. I decided to take an advantage of this opportunity so i bought Dell Dim8200 to replace it. Plugged everything back in... got a green on the mobo and network card. Hit the power.. and nothing. I was really mad. I tried everything. I thought maybe dell hadswitched the front I/O panel pin configuration.. so i bought an 8200 I/O panel, Got it, tried it didn't work. Then i realized a had bent one of the pins on my processor. Asked the forum and they said that if the processor is dead then the computer won't turn on completely. I am almost positive that this is your problem. The BIOS battery would have nothing to do with your computer not turning on. What you need to do is go to a local computer store and see if they well test your processor, and if its bad, thats your problem.
Joe. Diesel Jay
3 Posts
146
0
Posted May 13th, 2003 19:00
Ugh...fantastic.
I wonder what that's gonna' cost. I also wonder if I can return the processor if that doesn't cure the issue.
Later,
Jay- you wouldn't have to buy a new processor to test it. What at computer repiar shops, they will have it so that you can plug your processor into their motherboard that they have set up and if it turns on your processor is still good, but if it doesn't you know its bad and then buy one. I guess if it still doesn't work you really won't have to take the processor back because your going to need that too.
Joe

Diesel Jay
3 Posts
146
0
Posted May 12th, 2003 15:00
Good Morning:
Bringing this back to the top! Does anybody have any ideas? Right now I'm stuck with a machine down and I'm not even sure what the issue might be. Help...
Thanx,
jay