UNSOLVED

Gregpeck

updated

9 years ago

G

Gregpeck

3 Posts

0

2268

December 29th, 2017 12:00

Dell Optiplex 9010 com port reading problem

I cant get all data from com port in Dell Optiplex 9010- on each other computers I can read all data from com port, but on this Dell model no. I change all COM port settings on BIOS, on Windows 7, but still can not read all data comming on this port. When I use RS232-USB converter I can read all, on hardware Com port no. System is Windows 7 Pro 64 bit. Where is a problem???

  • rdunnill

    8 Professor

    •

    8811 Posts

    •

    35254 Points

    1500

    0

    Posted December 31st, 2017 14:00

    What are you using the COM port for?

    I have one of these, but I have never used the COM port. In the old days, they used to be used for mice and modems, but I've long since migrated to USB.

  • ieee488

    6 Operator

    •

    11126 Posts

    •

    38371 Points

    1500

    0

    Posted December 31st, 2017 17:00

    I change all COM port settings on BIOS, on Windows 7, 

    What the heck are you doing in BIOS ??????

    That is not where you change COM port settings.

  • Gregpeck

    3 Posts

    1500

    0

    Posted January 2nd, 2018 02:00

    In Bios I can change COM port Number, IRQ, Address..

  • Gregpeck

    3 Posts

    1500

    0

    Posted January 2nd, 2018 02:00

    I connect Bill Acceptor

  • ieee488

    6 Operator

    •

    11126 Posts

    •

    38371 Points

    1500

    0

    Posted January 2nd, 2018 05:00

    In Bios I can change COM port Number, IRQ, Address..

    And those parameters rarely, if ever, require changing.  I use COM ports quite a lot to communicate to test equipment with RS232 ports.

    But you go right ahead and keep on what you are doing. No one is going to stop you.