UNSOLVED

natenmere

updated

21 years ago

N

natenmere

10 Posts

0

2000

June 20th, 2005 01:00

cooling scenario for my 4700. Please, what do you think?

First of all I am reposting this same message that I posted in hardware upgrade.  I think I posted it in the wrong place the first time. 
I've been reading on this forum alot about adding extra cooling to the 4700 case and that it becomes necessary when adding video cards such as the 6600gt (sometimes), which I am going to install.  It also seems that heating issues stem only, or at least most predictably, from overheating video cards.  The 4700 has a case fan that is set up to vent inward as opposed to most other Dell Dimension's.   Here is my scenario:
 
I have already turned my case fan so that it vents outward.  This is important you will understand because I want the coolest, outside air to pass over the video card. 
 
Next I intend to install another outward venting fan behind the bezel, I think it's called.  just a small cfm ( I think that is the description)  fan.  Which will help cool the HDD.  I only have one at the moment.
 
Lastly a higher (like 45-55 cfm) fan which will vent inward directly through the pci cards, including the 6600gt.   I am going to mount it inside the case with very small screws which will fit through the side venting holes near the bottom of the case directly adjacent to the pci slots.   I realize 45-55 cfm is not a "high" amount of air movement.  My point is that it is more than the air venting out of the front of the machine. 
 
So I insert a "large" quantity of air inward, over the 6600gt.  A small portion of this air is vented outward around the HDD, (remember this fan is smaller) and the rest of the positive inward air flow is vented out through the green monster at the top of the cage.
 
I understand that it is important not to create hot pockets when you modify/add cooling fans to a case and I have tried to create this scenario where air comes in at the bottom and goes out through the front and the top. 
Maybe my inward fan needs to be larger than I have listed considering I have two out fans and one in.]
 
I know your thinking why mod when you don't have an overheating issue.  I would like remove any chances of overheating before any damage gets done and these mod.'s are completely reversible.
 
Any and all feedback is appreciated.
No Responses