UNSOLVED

TominNEOH

updated

22 years ago

T

TominNEOH

5 Posts

0

2272

November 10th, 2004 03:00

Connection of HP Laser Printer to Dimension 8400

This seems similar to a lot of problems listed here.  I have a new Dimension 8400 with Win XP Pro with SP 2.  I am trying to connect an HP LaserJet 1300 printer which is about 8-9 months old, but the USB ports will not recognize it.  I have a wireless keyboard and mouse which came with the new 8400 and they work on all 6 rear USB ports.  I can't find the CD which came with the HP printer, so I went to the HP website and downloaded the drivers for the HP 1300 unit.  When I download them and unzip the file, I have only an .ex_ file which is not recognized when I try to run that file.  If I go to the printer wizard, and select HP, there is no 1300 designation, and the 2 printers previous to the 1300 (1200 and 1220) will not work.  I also don't know if I have a LPT 1 or a DOT_1 port, and I've tried both.  I also have a Dell Inspiron 5100 with Win XP home edition (about 1 year old and not yet upgraded to SP 2) and it always recognizes this HP LJ printer (with the DOT_1 port designation), although I disconnect the printer often when I move the laptop.  Any ideas?  Thanks.
  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    113

    0

    Posted November 10th, 2004 10:00

    There are four separate downloads for WinXP, for your printer.  You need all the downloads.  Also check the HP support site for Windows XP installation instructions to make sure you do the install correctly.  The main program download is 74 MB, is that the one you downloaded?  There is also an option to order an installation CD. 
     
    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    113

    0

    Posted November 10th, 2004 13:00

    TominNEOH,

    Are those drivers even compatible with SP2? What do the readme notes say?

    Message Edited by DELL-ChrisM on 11-10-2004 09:13 AM


    DELL-Chris M (old account)

    #IWork4Dell

  • TominNEOH

    5 Posts

    113

    0

    Posted November 11th, 2004 14:00

    I should have noticed that the first 2 files referenced the HP 1300 as well as the HP 1150 printer.  I downloaded those 2 files in addition to the 2 downloaded previously and everything seems to be OK.  Thanks for the help.
     
    In response to the SP 2 issue, the only readme file I could find is dated May 2003, so there isn't any SP 2 reference.  As above, everything seems to work, so we'll see if there's a problem down the road with SP 2.  Thanks for the warning.