
UNSOLVED
S
siberianmo
12 Posts
0
1020
February 28th, 2001 12:00
C'mon DELL, this can't be that difficult!
This is my 6th attempt (over a 2 week span) at trying to find an answer to what should NOT be such a difficult question!
DELL provided me with a JAMCAM 3.0 when I purchased my Dimension L933r on DELL's website.
Great "gift" - but one problem: I cannot download any pictures!
The JAMCAM people have done as much as possible and have spent lots of time trying to get this camera to work with the USB port and/or serial port. No luck.
So, what's up? The JAMCAM works fine with my neighbor's COMPAQ laptop - amazing!!
So, where do I go from here?
DELL provided me with a JAMCAM 3.0 when I purchased my Dimension L933r on DELL's website.
Great "gift" - but one problem: I cannot download any pictures!
The JAMCAM people have done as much as possible and have spent lots of time trying to get this camera to work with the USB port and/or serial port. No luck.
So, what's up? The JAMCAM works fine with my neighbor's COMPAQ laptop - amazing!!
So, where do I go from here?
Responses (4)
Solutions (0)
siberianmo
12 Posts
303
0
Posted February 28th, 2001 22:00
I wish they would at least provide me with assurances that the USB ports are operating properly - which would surely be helpful. That is Dell's responsibility. The problem remains a mystery: the camera works, as demonstrated on a COMPAQ laptop. JAMCAM says their software is compatible with MS ME - they also acknowledge mucho problems with Dell in the past. Whether this is true or not, I haven't a clue! Thanx for responding.siberianmo
12 Posts
303
0
Posted February 28th, 2001 22:00
I concur - just getting to someone at Dell is very, very difficult. I'll try the video route.
JAMCAM has done about as much as they can - many hours "walking" me through this 'n that, but to no avail. They assure me that their software is made to interface with MS ME and that this is not the first complaint they've had regarding Dell products. Hmmmm. Thanx for the advice.

Steve_S
287 Posts
303
0
Posted February 28th, 2001 14:00
I've noticed several of your posts and I don't have a clue. Have you tried to post in the Dimension-Video conference? It appears that there are several discussions regarding cameras going on over there.
I'm not sure who the "JAMCAM" people are but I feel you should be talking to Dell Technical Support. I would also check out the Customer Service-General conferences for some help. Good luck.