UNSOLVED

randyh99

updated

21 years ago

R

randyh99

28 Posts

0

5397

December 12th, 2005 21:00

Cleaning the inside of your PC

This probably doesn't belong here but perhaps one of the moderators could point me to some real clear instructions/warnings/safeguards re cleaning the interior of my PC (Dimension 3000.) I have had the machine for about 7 months and think it probably should have the dust blown out, etc. There is nothing in the Dell documentation that talks about physically cleaning the unit. Perhaps they don't want the user doing it themselves?
  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    859

    0

    Posted December 12th, 2005 21:00

    I don't think there are any specific instructions on cleaning the "innards". 

    Because of the static sensitivity of many internal components you have to be careful with what ever "cleaning" you do.  Basically the only thing that you should do is "blow out" any dust.  Power of the PC and unplug it from the AC power source.  Open the case and very carefully blow out the accumulated dust around fans, ventillation holes with low volume air.  With the PC being as new as yours, unless it's been in a "dirty" environment it shouldn't have much accumulated. 

    Other than that, the best advice is "if it's not broken don't fix it".

    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • robinhood42

    2 Intern

    •

    1154 Posts

    859

    0

    Posted December 13th, 2005 03:00

    I'm having the same issue. My Dimension 9100 is about 6 months old and I've noticed that the vents on the outside are very dusty. I have a can of compressed air, but I'm not sure how to go about using it. Or rather what I mean is,  how far from the pc do you hold the can? I am quite sure the fan in the back is also in need of a dusting. But before I do anything, I thought I'd ask. By the way, my pc sits on my desk right near the monitor.
  • SR45

    2 Intern

    •

    12138 Posts

    859

    0

    Posted December 13th, 2005 09:00

    Keep the can upright when blowing into the case, and about a few inches away.  Do this with the fan and the innerds.  I also used a cotton swabs to clean the fan blades as well.  Others may have ideas that are somewhat different.