
UNSOLVED
card reader update install problem
Hi, I'm new here and I hope I picked the right category to post in. I have a Dell XPS 410. With the memory card from the digital camera I had no problem with the 1 Gig card downloading the pics into the pc. But now I have a 4 Gig SDHC memory card and nothing happens when I put it in the card reader in the tower. I downloaded updates for the card reader from Dell for my pc. The download R176587.EXE that installed no problem. But the other download R176603.EXE won't install the updates. It's the download Removable storage: TEAC CA200 HH 13-1 card reader. This download is as follows; it's Firmware version 1.3.2.6557, firmware update version 2.10, device info:memory card reader is connected, firmware version 04.00, update info Firmware version 04.08, then updates. After clicking the start updates it proceeds to(tries to) install but after it does a box pops up that says, The update process was not successful. Please restart the system and try again. I've tried this numerous times and always get the same thing. Any one have any solutions? It's frustrating because I have to use the USB in the mean time to download my pictures. I'd rather just put the memory card into the tower to download the pictures, and I don't want to have go buy a card reader if I don't have to. Any help would be much appreciated. Thanks.
Responses (5)
Solutions (0)
You will not be able to use it. There is a difference between SD and SDHC and if the card reader does not specifically state SDHC it will not work. I have quite a few that are like that and there is no amount of software that will get it to work. You will have to replace the internal reader or use a usb version.
Thanks for your reply. Interestingly, the notes for the firmware update (which is supposed to take it from version 4.0 to 4.08) for this device, the TEAC CA200 HH 13 - 1 card reader, states specifically that the update will add SDHC functionality up to 8GB. Unfortunately, whenever I try to run this it partly loads it and then abruptly aborts and starts again. After it does this 4 or 5 times it then states that the firmware update failed and to try again later. it seems that some people have successfully loaded this update but for some reason my machine just doesn't seem to do it. I have tried turning off all the programs that are running such as firewalls and anti-virus programs but this doesn't fix the loading problem. Anyway...thanks for the response.
Rory.Schneider
1 Message
371
0
Posted January 1st, 2011 17:00
You will not be able to use it. There is a difference between SD and SDHC and if the card reader does not specifically state SDHC it will not work. I have quite a few that are like that and there is no amount of software that will get it to work. You will have to replace the internal reader or use a usb version.
Thanks for your analysis! It's very valuable, It helps me out of the problem.Don't know if this can still help anyone years later but I had the same issue and have been able to overcome and successfully update to 4.08. By card reader is now able to read more modern cards. I take no responsibility and I didn't really know what I was doing but bottom line this worked for me:
- After failure reboot
- Running the exe generates a folder in your AppData/Local/Temp folder (%Temp%) (called something like p*.??? - those are wildcards - that's all I remember). In there there is a .bat file called "Do*.bat" containing a call to chgdrv.exe. Don't run it yet just pointing it out that you need this for a later step.
- Open up command prompt as administrator. Right click cmd shortcut, and choose "run as administrator"
- In the new command shell session change to folder in step #2 above and run the "Do*.bat" command referenced in #2 above. You should get a success message. Once done if you had the 4 drives they will disappear.
- Reboot
- Drives are still not there but open device manager and find device with exclamation point (error) called Firmware Updater or something like that. Right click and choose rollback driver.
- Reboot. The 4 drives now show up and running R176587.exe again will prove that you are now on 4.08 (don't actually reinstall though).
- No warranties. This worked for me but was a hack.

JohnSta
2 Posts
371
0
Posted August 9th, 2010 08:00
I have exactly the same problem. I also tried installing the driver and firmware updates R175612 and R175239 posted a couple of days before the ones mentioned in the above post and this firmware update also terminates and says it was not successful. Did anyone ever figure out how to solve this problem?. I sure would like to be able to use my card reader with an SD card bigger than 2 GB