UNSOLVED

mhw100

updated

21 years ago

M

mhw100

58 Posts

0

5357

May 6th, 2006 01:00

Can a Dim 8200 400 mobo be replaced by a 533Mhz mobo

I already posted this over in upgrade so I apologize because it might be better answered over here: 
 
Can I exchange the 400 Mhz mobo I have in my 8200 for the 533 mobo?  This would allow then for an upgraded chip and I could still use my RDRAM PC800 memory.  Thank you.
  • rogan2915

    89 Posts

    271

    0

    Posted May 7th, 2006 13:00

    As long as it fits, you can swap it out with anything. However, it's pretty unlikely that you will be able to get some random non-dell motherboard to fit without some heavy modifications.
  • mhw100

    58 Posts

    271

    0

    Posted May 7th, 2006 14:00

    The 8200 has 2 motherboards.  One for the Intel 850 400mhz and on for the Intel 850E 533Mhz.  What I would like to know is if the 850E 533mhz board will fit into my 850 400mhz box?
  • mhw100

    58 Posts

    271

    0

    Posted May 9th, 2006 19:00

    Thank you for responding.  Do you know if 1T751 is the correct part number for the 850e board?  I can't get a straight answer out of Dell. 
  • Timdrouilard

    628 Posts

    271

    0

    Posted May 9th, 2006 19:00

    If you are referring to replacing your Dell 850 motherboard with another Dell motherboard that happens to be the 850E model, then yes it should fit right in.

    The only difference as far as I remember is one has the 850 chip and the other's chipo is an 850E.

    The 850E chip motherboard came out in or about June of 2002 when Intel released the 2.53Ghz 533Mhz CPU.

    Even at that time, the ONLY way to tell which chip you had was to remove the heatsink and physically look at the label on the chip.

     

    If you are referring to installing a non-Dell MB that uses the 850E chip, then that's a whole different ballgame.

  • Timdrouilard

    628 Posts

    271

    0

    Posted May 9th, 2006 22:00

    I don't know what the current part number is.

    From My Dimension 8200's original configuration, it was shown as....

    1P460    ASSEMBLY, CARD (CIRCUIT), PLANAR (MOTHERBOARD), 850E, DIM8200

     

    That was back in June of 2002.