UNSOLVED

dsmtoday

updated

24 years ago

D

dsmtoday

5 Posts

0

15770

February 25th, 2003 18:00

Bug in GX-260 BIOS - AGP card never picked as primary

There is a setting in the A02 and A03 BIOS for picking the primary video card.  It is either Auto, which defaults to a PCI card, or AGP, which is supposed to pick the AGP card as primary.

Setting this to AGP does not work.

I have an ATI 9700 AIW Pro (AGP) and an ATI 7500 (PCI).  No matter what I do, the PCI card comes up as primary.  This is a big deal for me because ATI 9700 AIW's capture hardware will not appear unless the card comes up as the primary video card.  Trying to set the card as primary using the Windows control panel after the fact does not work.

I have this same setup working flawlessly on the Dimension 4550.  I suspect the problem here is the onboard video of the GX-260, which the Dim 4550 doesn't have.

Please fix this BIOS bug ASAP and give me a timeframe on the fix.

Thanks,

-todd-

  • DELL-Cody

    2 Intern

    •

    2166 Posts

    815

    0

    Posted February 27th, 2003 19:00

    With only the PCI video card installed, is the system able to set the onboard adapter as the primary device?

    Your information has been collected, and will be given to Dell Engineering as soon as possible. No ETA for a fix is available.
  • dsmtoday

    5 Posts

    815

    0

    Posted February 27th, 2003 21:00

    If I take the AGP card out, and I have the BIOS setting mentioned above set to AGP, I think it boots the onboard video.  I say "I think" because the PCI card does not come up then, but the system otherwise seems to boot.  I didn't try to see if onboard video was actually working since it uses VGA cables and I only had DVI cables hooked to my two monitors.
  • Shonk

    28 Posts

    815

    0

    Posted March 1st, 2003 02:00

    the bios is buggy with extra cards

    in my gx260 with a00 a03 a04

     

    agp card = geforce 2 gts

    pci card = voodoo 3 3000 pci

     

    yes 2 monitors

     

    the dell boots to the pci card no matter what i tell the bios to do

     

     

  • toverman

    1 Message

    815

    0

    Posted March 10th, 2003 08:00

    I have the same problem, is there a fix available??

     

    My setup: gx260, bios A03, AGP card ATI 7500, PCI Matrox, Bios setting=AGP, Windows Display Property=Agp-monitor for primary monitor, Windows Xp Pro

    All is working ok, except the startup info displays on the PCI-monitor, despite the fact that the bios setting "primary video adapter' is AGP.

    The Windows property "use this monitor as primary monitor" is working ok, as soon as windows is active (Signon) it appears on the AGP-monitor.

    Thanks,

    Ton

  • Chowder

    1 Message

    815

    0

    Posted March 11th, 2003 15:00

    As an FYI-

    I have been going through the hoops trying to resolve this issue. I am running BIOS A03 and have multiple video cards (7) and none of the AGP cards boot as the primary video card.  I have had a lengthy thread going with Matrox to idenitfy a TV tuner issue with multi-mon support and it looks like the culprit is that the AGP slot never boots as the true primary card. To further attest to this issue, when in WinXP SP1, selecting Display properties, the AGP card is listed as #2 when you click as Identify.  Although I can manually force the #2 card as primary in WinXP, this does not help for games, software, etc. that checks the status of the hardware from the BIOS, etc. 

    Below I have listed the cards I have tried in different configurations:

    Note, for each new config, I re-image my hard drive to plain vanilla WinXP Pro retail and then re-install the latest video drivers.

    • Generic SVGA
    • Matrox Millennium
    • Matrox G450 eTV
    • nVidia TNT2
    • nVidia 64Mb geForce 3
    • ATI All-in-Wonder (original)
    • S3 Savage

    Please let me know if you require any additional information or if you have any suggestions I can try to correct this

  • tkjp

    1 Message

    815

    0

    Posted March 25th, 2003 10:00

    This problem is not fixed even in the bios A05.  My ATI AIW 8500DV can not be real primary when PCI graphic board is inserted regardless the setting of primary video card.  Only way to get full functionality of AIW is either to remove PCI card or to disable PCI slots.
  • wwwjdbwww

    3 Posts

    815

    0

    Posted July 26th, 2004 05:00

    I'm having the same problem -- cannot get the agp slot to be the primary display when another card is in the pci slot -- on my gx260, A06 bios.  I noticed the other posts on this are over a year old -- is there a solution available...?

    thanks,

    Jerry