
UNSOLVED
Big Problem
I have a Dell 4600. One day it went into standby and nothing would happen. Nothing. I called Dell and they sent someone over to install new memory, I guess. After he left I tried to get onto the system and kept getting a blue error screen with Driver_IRQ_Not_Less_or_Equal. Something about Memory is going to clear. When I called Dell tech support. What they did was make a small problem LARGER than it already was. They said the technican did not properly upload the new hardware and had me go into DOS and into Setup. Well......Now they cannot get me out of DOS. I was on the phone with tech for almost 4 hours and all I keep getting is "F1 to retry boot, f2 to Setup". Just a black screen with those words. All I want is to get back to my desk top and at least save some of the things I have stored on the hard drive. Any suggestions on how I can get some of these programs stored onto CD's or any way to get out of DOS.
Responses (2)
Solutions (0)
DELL-Donald K
2 Intern
•
3969 Posts
84
0
Posted March 4th, 2004 22:00
if you are getting hte F1 F2 error, then after confirming the cable connections are correct, boot to bios then follow the reset info by my name.
DELL-Donald K
#IWork4Dell

MadThinker
516 Posts
84
0
Posted March 4th, 2004 16:00
tbw10567,
Unplug the system and open the case. Locate the hard drive and unplug the connections to the hard drive. Make sure that none of the connections are bent or broken then plug back in.Trace the ribbon cable to the motherboard and do the same here. Plug the system back in and see if it boots. If the system still does not boot to windows go into system setup and make sure that the hard drive is checked as a boot device and make it the first boot device and try again.