
UNSOLVED
Automatic reboot in the middle of the night
Originally posted in First Time Users, I've reposted here as suggested by one reader.
Dimension E510 WinXp Media Center IE7
I began leaving the computer ON overnight a month or so ago due to start up problems unrelated, I believe, to this issue. One reader of the original thread suggested the problem might be related to the start up problem and asked for details. Those details are listed last below.
Every night around 3 A.M. the computer restarts itself. It is not exactly 3 A.M. just around there. Usually I am not on at that time but a few nights ago I was with Outlook Express and IE7 running. On that occasion, without warning, it just restarted.
Automatic Updates is OFF.
Automatic Restart after power failure is OFF.
There is no automatic restart scheduled task that I can find.
Some nights I close all programs, some nights I don't. That seems to make no difference.
One night I unplugged my high-speed connection (cable) and phone line in and out. The computer did not restart during the night. The next night I unplugged only the high-speed connection and again the computer did not restart during the night. Last night I only turned OFF the modem and the computer DID restart somtime in the night.
Can anyone tell me what is going on here and if there is something I can do to make it stop (other than unplugging cables at night)?
For what is it worth Event Viewer shows a Warning for W32Time with Event ID 36 about every day but not necessarily around the time of the automatic reboot.
One morning for the first time it was Error for W32Time with Event ID 29 and 17.
Start up problem -
I press the power button and everything appears to boot properly. The log on screen appears and I log on. My desktop appears normally and then within a few seconds it starts booting again. When it gets to the black screen with some info (sorry don't know proper name) that normally just comes and goes, it stops. ALERT! Battery Power Low message is displayed. (I replaced the battery but this still happens.) Status lights 1, 2, and 3 are illuminated on the front of the tower. Press F1 to continue which I do and usually it boots fine on the second attempt. Occasionally it takes three tries.
I believe this problem is related to pretty well documented power supply problems with this model. I am going to replace the power supply one of these days just haven't gotten to it yet. This is why I'm leaving it on and want it to stop rebooting on its own.
Thanks.
Responses (35)
Solutions (0)
That's a real can of worms you got there mate. Net admins can issue a restart command for after they install or update things, and they typically do it during the middle of the night, but that would take place within an administered LAN; I've never known an ISP to do that, and even LANs don't do it every day or even every week. You might ask your ISP...which is whom by the way? This is DSL highspeed, from the phone co? But you don't mean you turned off the highspeed modem and it still happened? Nothing can enter the computer from the network that way.
It's not Windows Time. That errors all the time, and it never causes restarts. If you don't care about the absolute accuracy of the clock, you can disable Time under Services and set the clock yourself when you notice it's wrong.
Your startup problem is not characteristic of power supply, although anything can happen. And power supplies certainly don't know when it's 3AM. That it says 'battery power low' with a new battery, begins to look more like a motherboard bug. E510 has those too. In a way, consider yourself lucky it doesn't do these spontaneous restarts all the time, and meanwhile unplug the ethernet plug at night if that keeps it running.
The router should not be able to initiate a restart command. I don't exactly know what "standby" means in a modem. But try this: Leave all the wires connected and remove power from the modem altogether (unplug its brick). If that prevents it, that means whatever is coming down the net overrides 'standby', as well is possible.
You're lucky. I can't restart my modem once the system is running, it won't be recognized unless it is operative at system powerup. Net hardware works in mysterious ways.
Realize that the phone and email answerers for Comcast may know absolutely nothing of how the network actually operates or what it is programmed to do. This is largely true of Dell first-level respondents as well.
Thanks Peter and x_lab rat.
I ran a virus scan with negative results. I had a trial subscription to an anti-spyware program that I ran after all my problems started and it was negative as well.
Something coming over the internet around three a.m. causing my computer to restart was one of my thoughts as well. I emailed ComCast (high-speed cable) and they responded that it was not possible. That's a quote. I'll try calling this time and see what a human says to me directly.
A slight correction to what I said previously - I've turned the modem to STANDBY not OFF. It is still powered but none of the lights indicating send, receive, etc. are illuminated. Unless there is some defect in the modem I don't see how unplugging the high-speed would keep it from restarting whereas turning the modem to STANDBY does not. I tried a small test by starting a YouTube video and then turning the modem to STANDBY. The video continued to run for a short time but then stopped. It started again a short time after I turned the modem back ON. This would seem to indicate the modem is working properly.
Is it possible the modem itself or the Dynex router downstream of it are initiating the restart? In the event it may matter, the other computer connected to the router has always been OFF when all my little problems occur.
Last night I unplugged the modem from the AC outlet. No automatic reboot in the middle of the night.
Tonight I will leave the modem powered but unplug the high speed connection into it. That should isolate the source of the restart to either the modem itself or a command coming from the internet.
If McAfee is reliable, I am spyware free.
Nothing in the modem should be able to generate any code at all, on its own. And it doesn't have a clock, so it doesn't know when the middle of the night is. I'll go out on a limb and predict that with no input to the modem, nothing will happen.
Once you have proved that it's coming down the network, call the ISP back and when they say "that's impossible" tell them you proved it by elimination and you want to talk with a senior technician (or the old standby, 'your supervisor'). There's got to be a reason for this, whether the phone answerers know it or not. And unlike computers, internet service is always 'in warranty'.
Or it could be a program on his machine that is causing the reboot that is communicating over the Internet.
If you leave everything as is (modem on and connected) but boot in safe mode, you can see if anything running on your machine (other than a root kit) is causing the problem.
I don't see how something on the network can cause his machine to reboot without a program running on his machine.
Peter
There is a network OS restart command. As it's admin-only, it is capable of overriding everything, including possibly the modem standby status.
The only reason I can think for an ISP network to issue such a command is to force restart their own distribution nodes. But it appears to be global, rather than address-specific, so it restarts everything equipped to read such a command that is connected.
Just surmising from what little I know of network operations. I'm a box guy, not a net guy. :smileywink:

PETER345
1 Rookie
•
5796 Posts
2237
0
Posted May 9th, 2008 13:00
It sure doesn't sound like a PSU problem to me. I don't see why it would reboot about the same time and only if you have an Internet connection if it is the PSU.
I would run a full virus and spyware scan to make sure there is not some software rebooting your machine that is communicating over the Internet.
Peter