UNSOLVED

Angel Baby

updated

21 years ago

0

11180

July 3rd, 2005 14:00

Audio and Sounds

I do not have logon sounds, exit sounds, alert sounds or any sounds associated with MSN Messenger. Is there anything I can do ? I have e-mailed to dell several times with no success to their suggestions. I believe that when my computer was initially set up, the sounds may have been deleted or turned off. When I play/hit browse for my sounds, they do play. Can't understand what is going on. Please help me if you can - Desperate.
  • HTT Good HT Bad

    2 Intern

    •

    1275 Posts

    209

    0

    Posted July 3rd, 2005 16:00

    click start-than control panel- than switch to callsick view-than sounds and audio devices than click the sound tab and then see if you see any sounds asociated with an action, also checked that your speaker are powered on and that they are hooked up right and the sound control in windows is turned up
  • 209

    0

    Posted July 3rd, 2005 17:00



    @HTT Good HT Bad wrote:
    click start-than control panel- than switch to callsick view-than sounds and audio devices than click the sound tab and then see if you see any sounds asociated with an action, also checked that your speaker are powered on and that they are hooked up right and the sound control in windows is turned up


    thanks, but don't have call sick view. went to c: , hit programs files, hit analog devices and click on sound max folder, double click log folder, found set up and double clicked and notepad says "silent". Could this be the problem?
  • HTT Good HT Bad

    2 Intern

    •

    1275 Posts

    209

    0

    Posted July 3rd, 2005 17:00

    i meant clasic view, it might be a problem, try reinstalling the driver or get some cheap-o sound card

    Message Edited by HTT Good HT Bad on 07-03-2005 01:26 PM

  • 209

    0

    Posted July 3rd, 2005 17:00

    thanks, but didn't work - all sounds work except, windows logon, exit windows log off, msn message sounds, alert sounds - would it help when I re-boot, if I get f2 for set up, then review ?
  • mash007

    8 Posts

    209

    0

    Posted July 3rd, 2005 18:00

    On a windows xp, go to the control panel, then double click on sounds and audio devices (make sure your in classic view for the control panel). Then click the sounds tap, and for sound schemes choose windows default, see if that works.
  • 209

    0

    Posted July 3rd, 2005 19:00

    after i change to classic view & windows default, do i need to re-boot system?
  • mash007

    8 Posts

    209

    0

    Posted July 3rd, 2005 19:00

    Remember, its classic view on the control panel not windows xp. But now you shouldnt need to restart the system.
  • 209

    0

    Posted July 4th, 2005 01:00

    Thanks, but still is not working properly. I have gone thru every trouble shooting site and I am still unable for this machine to work properly.  As stated earlier, when my computer was initally set up, the installer indicated that he turned off the sounds for logon and logoff.  Then approx. 3 wks ago, he was at my computer and attempted to fix and then all of my sounds were gone [my alert sounds for msn messenger; etc].  My CD does play and I have placed the volume icon in the task bar and it makes the noise (beep).

    When I go into control panel under sounds scheme, program events and then the name of the sound shows, hit play and the sounds are there. I am just baffled, as the sounds are there, they just won't play.  I have NO IDEA what my programmer did to my computer as I do believe it is something real simple, I just can't put my hand on it and don't know what else to do.  I  do not have a CD where I can re-install my windows xp professional, version 2002 + I don't know whether or not doing a system restore to the original date would help either (I beliver the date was: 01/08/05), since I have downloaded quite a bit of information since that date.   Any help would be greatly appreciated. Thank you for any assistance you can give to me.   Sincerely, AB

  • mash007

    8 Posts

    209

    0

    Posted July 4th, 2005 03:00

    Ok, if those are all set-up I suggest updating or re-installing your audio driver.
  • mash007

    8 Posts

    56

    0

    Posted July 4th, 2005 03:00

    also, what did the programmer do, maybe that will help. Did he re-intall windows?