UNSOLVED

Otakuon

updated

21 years ago

O

Otakuon

1 Rookie

•

33 Posts

0

14785

June 16th, 2005 23:00

AHHHH!!!! My new Dimension 9100 just died!!!!!!

I can't believe this!!! My 9100 has running flawlessly for the past 3 days...and then all of a sudden while I was using it, it just spontaneously powered off and now won't come back on. The power light is flasing an amber color. I assume it is some sort of power fault, despite that fact that all the internal lights are on. I guess I will have to contact Dell customer support...which I am dreading because everyone tells me the experience is absolute heck!!! So wish me luck...

Otakuon

VERY BUMMED INDEED!!!

Message Edited by otakuon on 06-16-2005 07:49 PM

  • lxunyc

    8 Posts

    576

    0

    Posted June 16th, 2005 23:00

    My experience with Dell Support is a bit hit-and-miss.  If you don't think the person you talk to is helpful, hang up and call back again.  (Also, "chat" is helpful.)  Sooner or later you'll run into a tech that's good.
     
    Good luck! :smileyhappy:
  • shesagordie

    12 Elder

    •

    46017 Posts

    576

    0

    Posted June 17th, 2005 01:00

    otakuon.
     
    Open the case and check all the connections, by unplugging and the reseating them, if that fails to correct the problem, then contact Dell ASAP.
     
    Bev.
  • Otakuon

    1 Rookie

    •

    33 Posts

    576

    0

    Posted June 17th, 2005 04:00

    It's just so strange...it's as if everything should be working, but it just won't turn on and I have a flashing amber light. The green LED on the mother board is on and the activity and link LEDs on the LAN port are on/flashing as well. But yet, the machine just will not respond...it is very flustrating.
  • Otakuon

    1 Rookie

    •

    33 Posts

    576

    0

    Posted June 17th, 2005 05:00

    Well, I just talked to "Phoebe" on Dell Chat...they are sending me a new power supply and mobo within 24-36 hours...so I will just have to wait and see if I can get this fixed.
  • SR45

    2 Intern

    •

    12138 Posts

    576

    0

    Posted June 17th, 2005 10:00

    I would consider sending it back, and not play the fix game that may or may not fix it, and you will loose the leverage of the 21 day return policy period which is now slowly going by, by....They can always send you a new system if you are not happy, not just something they only think may fix it...Think hard on this....good luck

    1). i9300 760 2.0 Ghz/2 Mb/533 Mhz FSB
         WUXGA TrueLife screen
         1 Gb Dual Channel DDR2
         Go 6800 256 Mb nVidia
         60 Gb 7,200
         Windows XP Home SP-2
         8XCD/DVD burner
         2915 Wireless / 350 Bluetooth Wireless
         9- Cell battery

    2). Dim 4400 2.6 Ghz upgraded
         1 Gb 2100 DDR memory
         20 Gb Hard Drive
         Windows XP Home SP-2
         17 inch LCD ( 1703 FP )

    Message Edited by SR45 on 06-17-2005 12:05 PM

  • fantomx

    625 Posts

    576

    0

    Posted June 17th, 2005 13:00

    Man, that's a bummer. Make sure you come back and tell us what happens.
  • Otakuon

    1 Rookie

    •

    33 Posts

    576

    0

    Posted June 17th, 2005 13:00

    Well, being that they said it will only take 24-36 hours to get my replacement part, I am willing to give it a try. If this doesn't work, then I will deffinetly send my System back in and request a new one. I would just perfer to avoid the cost/hassle/time that returning the entire system will incur. I am about 90% confident that the problem lies in a faulty power supply being that they do have a rather high rate of premature failure (they follow the "bathtub cruve" of reliability).
  • salucchi

    2 Intern

    •

    275 Posts

    576

    0

    Posted June 17th, 2005 13:00

    Otakuon,
     
    This truly is a bummer. I have to agree with SR45. A brand new system that won't power up after only 3 days could be a sign of things yet to come. I would send it back to Dell (they would incur the shipping costs since it's with-in the 21 day time frame) and request a new replacement system sent out to you. I wish you the best of luck either way.
     
    Sal
  • se7en5ive2

    584 Posts

    576

    0

    Posted June 17th, 2005 19:00

     Brand New and refuses to power up after Day 3? So much for bench testing and burn in, they probably just blew the image on and shipped it out the door.

     Consider it a DOA and request a replacement. Do not hesitate and do not go for the shotgun repair approach. Accept no other solution to the problem; this is supposed to be their new state of the art machine and it is time for them to prove it.

     Don't wait too long to decide and good luck with either decision you make.

                                                                                                                           7

      You may have something with the quake, open it and check plugs and also make sure you didn't trip the ground fault at the receptacle where the machine is plugged in. Could be something really simple.  

    Message Edited by se7en5ive2 on 06-17-2005 06:45 PM

  • Otakuon

    1 Rookie

    •

    33 Posts

    209

    0

    Posted June 17th, 2005 20:00

    Well...after reading several different places in the Dimension 9100 technical manuals, all of them indicate that a flashing amber light on the power button is due to a fault in the power supply. So, that is why I am willing to try and see if a power supply swap will resolve the problem. If it doesn't, then I will deffinetly return it for a new system. It seems that the two most common cuases of pre-mature system failure are power supply and hard drive failures. I believe that if the problem was with the hard drive it would at least power up and then fail during the BIOS boot sequence. Anyway, hopefully I will get this all cleared up in a timely manner...when the 9100 was working, I was very pleased with it.

    p.s. We did have a moderate earthquake (4.9-5.3) centered about 2 miles from my house the day that the computer died...I wonder if it knocked something loose... ;)