UNSOLVED

JimCC

updated

20 years ago

J

JimCC

25 Posts

0

6071

December 4th, 2006 05:00

Advise Assistance Request (Denny Denham and ShesAGordie, please Help!!)

I’d like some useful advice, please.

Denny Denham and ShesAGordie, your studious and thoughtful advice is especially welcome.

Here are the questions:

1.  Is my upgrade via use of a local CD-ROM or via a WWW download and install?

2.  Which software should I use?

3.  Are there written step-by-step procedures somewhere on the WWW for me to follow as I perform these death-defying acts?

I own a Dell Dimension 4550, purchased and received in December, 2002.

I have increased the on-board DDR SDRAM from 256 MB (which the computer shipped with) to it’s present 768 MB.  It all works in perfect harmony and I’m happy as well as pleased.

The computer shipped with Windows XP Home Edition, SP-1, pre-installed.  I also received a Dell imprinted CD-ROM, the label of which reads:

Operating System

Reinstallation CD

Microsoft Windows XP Home Edition

Dell

I have never had occasion to open the plastic pouch this CD-ROM came in.  It is unused.

Over the course of time, I have come into legitimate ownership and possession of the CD-ROM Microsoft Windows XP Home Edition, SP-2.

I cannot recall if this CD-ROM was used to upgrade my operating system, or if the upgrade was downloaded from the WWW and installed without using the CD-ROM.  A check of my Add or Remove Programs applet indicates that there is an entry for “Windows XP Service Pack 2”, but I’m not sure if that means my upgrade was done via on-hand CD-ROM or WWW download.

Ergo, question 1 above applies.

Moving right along……

The computer also shipped with an 80 GB Ultra ATA/100 Seagate hard drive, which is still working, although as of late it has been making weird, funny, scratch-like noises.  My research tells me these noises are NOT normal and it’s time to give some serious consideration to having a new hard drive sitting around because my present hard drive is soon to take a permanent vacation.

So, I purchased a brand new hard drive, a 300 GB Ultra ATA/100 Seagate hard drive (Circuit City had them on sale for less than $90.00, including tax, and I couldn’t resist) and have it on hot standby, ready to go.

Now, questions 2 and 3 above apply.

To expand question 2:  When I re-install my Windows XP Home Edition operating system, should I use the CD-ROM which originally shipped with my computer (even though I will not be re-installing to the original hard drive), or should I use the CD-ROM which is not from Dell but has XP Home Edition, SP-2, on it?

And lastly but not leastly, question 3, which pretty much stands on it’s own.  That is:  Are there written step-by-step procedures somewhere on the WWW for me to follow as I perform this hard drive change out?  (also known around here as a death-defying act)

If so, would you please so kind as to share that particular bit of knowledge.

Thank you to all who can shed some enlightenment on my situation.

Sincerely,

Jim

  • NVRambo

    1864 Posts

    279

    0

    Posted December 4th, 2006 09:00

    Jim -

    1)Here's a link of instructions to install the hard disk in your Dimension 4550:

    http://support.dell.com/support/edocs/systems/dim4550/replace.htm#1154906

    2)Regarding the reinstall media, use the Dell supplied Windows XP CD. For any number of reasons (unless you have a dial up internet connection), it's the best and easiest way to go, imo. If you have dial up only, then someone may wish to post instructions or links for slipstreaming SP2 into your install. There are now some 60+ Windows Updates that will need to be installed AFTER SP2, so dialup isn't really practical for getting that done in a prompt matter.

    3)Have no idea as to whether or not your current install of Service Pack 2 was from disc or downloaded, but given the age of your system I'd think it came down via Windows Update (which suggests you have cable or DSL). SP2 should show up as you're describing in add/remove programs if you selected "archive old files" during the install.


    Lastly, I don't know how you plan to use the new larger hard drive, but if you're worried about your 80gb Seagate drive, then I'd locate my Dell Dimension Resource CD (if you have one) and run the Dell 32-bit diagnostics (extended) on the drive. If it passes extended tests it is likely fine.
  • SR45

    2 Intern

    •

    12138 Posts

    279

    0

    Posted December 4th, 2006 11:00

    Jim... Denny Denham passed away not too long ago, mentioned on this forum, and will be sorely missed if you did not know.