UNSOLVED

Brand

updated

20 years ago

B

Brand

5 Posts

0

5284

December 28th, 2006 18:00

9200 memory upgrade

Hi i have got 2x pieces of DDR2-667 5-5-5-15 preinstalled but also have 2x DDR2-533 4-4-4-12 from my old pc.

Should I install them or it will compromise memory speed significantly as the new modules will also run @ 533? Or they would not – (one channel 2 old sticks and another – two new ones)? I am planning to put two old sticks into slots 3 and 4 - does it matter were?

Slot4 dark

Slot2 light

Slot3 dark

Slot 1 light

CPU

Thanks in advance.

  • olmer

    2 Posts

    67

    0

    Posted December 29th, 2006 17:00

    Let knowledgeable people correct me if i am wrong - 667 will still work at 533 if your fsb is 266 - there is no option to increase speed/lower multiplier in 9200 to have memory run at 667 as there is no way to increase fsb.

  • shesagordie

    12 Elder

    •

    46017 Posts

    67

    0

    Posted December 29th, 2006 21:00

    Dell Dimension 2400 System Review 
    olmer wrote:

    Let knowledgeable people correct me if i am wrong - 667 will still work at 533 if your fsb is 266 - there is no option to increase speed/lower multiplier in 9200 to have memory run at 667 as there is no way to increase fsb.

    That is correct. 

    Bev.

     

    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.