UNSOLVED

martmor

updated

21 years ago

M

martmor

14 Posts

0

9147

June 21st, 2005 13:00

6800GT problem

I just got my 6800GT and I go to stick it in my pc.

Hers a pic of the card by the way.
http://www.pcgear.co.nz/files/root/t_92774.jpg

If you look at the piece of metal on the case of the card thats on the bottom right hand side, that piece is being blocked by a round sticky up thing (capacitor?). So the card wont seat its self. So what I'm wondering is could that piece be safely removed and by what (basic) tools. I know it would void my warrenty but hopefully I wouldnt need it anyway.

The only other option would be to send it back and get a Club3D (or similar) without the large case.

So whats the best move. I'd rather just cut it and be done with it but not if I'm going to make a mess of it.

Thanks
  • Mad Pistol

    93 Posts

    198

    0

    Posted June 21st, 2005 14:00

    what's the model number on your computer? I've never heard of anyone running into this problem before.
     
    Also, you will not be able to remove the capacitor because if you do, it will cause your system to either overdose or not get enough power. This could cause lots of problems, and yes it would void your warranty.
  • martmor

    14 Posts

    198

    0

    Posted June 21st, 2005 14:00

    Its a D4600.

    Rather than doing the void the warrenty and cutting it thing, I'll probably return it and get a Club 3D version with the big case on it.
  • red_violin

    129 Posts

    198

    0

    Posted June 21st, 2005 19:00

    choppin off ANYTHING from any piece of PC hardware will ruin that piece and usually cause damage to stuff sourrounding it.
     
     
    a new case it beter than a new card/pc
  • paparandy

    2 Intern

    •

    406 Posts

    198

    0

    Posted June 22nd, 2005 12:00

    Make sure the PCI slot next to the AGP slot is cleared. I have a 6800 GT OC from BFG in my Dimension 4600 and no problems with the fit. I moved the sound card from the slot next to the AGP though. That way, you get better cooling and no IRQ conflicts.
  • martmor

    14 Posts

    198

    0

    Posted June 22nd, 2005 20:00

    Yeah the PCI beside it is cleared. The problem is at the far end of the card wherea capacitor is sticking up that wont allow the card to seat properly because part of the card housing is in the way.

    I starting to wonder if its possible to bend the offending piece of metal out of the way.
  • Mad Pistol

    93 Posts

    198

    0

    Posted June 24th, 2005 15:00

    do so at your own risk. you can bet that if you tear the thing off, your motherboard is toast. It's that simple.