UNSOLVED

adbui

updated

21 years ago

A

adbui

11 Posts

0

7079

November 11th, 2005 01:00

6600GT + 4600 = PSU Problem?

I just got a 6600GT (AGP) in my dim4600(i) and it's connected VIA DVI adapter (not crt, even though it's a CRT monitor, no disadvantages correct?), and for some reason, every now and then, it'll just shut off.

Is this a PSU problem? It cannot be a GPU overheating problem because the 6600GT idles at 43-48C with a house fan blowing directly into the case. The HDD idles at 25C, and I don't know the CPU idle temp.

At load the GPU will go up to 70C with the toughest games, but most of the time it's games from 2 generations ago, (I.E. HL or CS 1.6), and hits about 55C max.

I have it clocked at 550 / 1100 stable, even though I can hit 570 / 1170 stable.

It happens even at 500 / 900 (STOCK) and EVEN AT 300 / 700! When I underclock it!

Usually it's when I minimize or close something that it reboots, can this cause permenant damage to my PC? Is this a PSU problem?

I also get
02/08/0 Error allocating mem bar to PCI device, twice when I reboot. Could this be it?

If it's a PSU problem, can you tell me what size PSU's fit into the 4600 case and some specific ones? As well as some fans, PCI work? I have 3 PCI slots after I rip out the 56k modem adapter.

Message Edited by adbui on 11-10-2005 09:22 PM

  • morbidman

    381 Posts

    370

    0

    Posted November 11th, 2005 20:00

    So your monitor is vga? The PSU can handle the card.
  • adbui

    11 Posts

    370

    0

    Posted November 12th, 2005 04:00

    Then why does my comp keep rebooting...couldn't be HDD or GPU overheating...

    Doubt it's proc?

    2.66 P4 northwood 533mhz
  • morbidman

    381 Posts

    370

    0

    Posted November 13th, 2005 00:00

    Check to make sure the card is seated correctly and that all power connectors are properly attached. Also, make sure you have the latest drivers. If you still encounter problems, replace the new card with your old one. If it works, test the new card in another machine.
  • adbui

    11 Posts

    370

    0

    Posted November 15th, 2005 21:00

    Looks like it could be a CPU failure... :(


    http://www.abxzone.com/forums/archive/index.php/t-54392.html


    anyone else have any idea?