UNSOLVED

Alex09

updated

13 years ago

A

Alex09

27 Posts

0

174957

January 22nd, 2014 10:00

5.1 question regarding Inspiron Desktop 3000 (3847)

Question about the audio on the PC.  I just bought this (in production).  In the description for the rear jacks at http://www.dell.com/ca/p/inspiron-3847-desktop/pd?oc=di670_ft_s1359e&model_id=inspiron-3847-desktop it says "3-stack audio jacks supporting 5.1 surround sound". The manual says:

Realtek ALC662VD
Intel 5.1 Channel HD audio

But I just noticed that when I look at a close up of the back panel of the PC, it only has one line-out along with a line-in and a mic.  How does this do 5.1 exactly?  Can the line-in and mic be remapped with the Realtek software to be outputs?  Because if not and you have to use some USB or HDMI speaker setup to achieve 5.1, this seems pretty deceiving to me.  My speakers require 3 outputs to my sub for 5.1.  I can install my X-Fi audio card for 5.1 if I have to I guess, but I am thrown off a bit by the apparent capabilities of the audio on this PC.

Thanks.

  • 1664

    0

    Posted March 2nd, 2014 16:00

    Alex, 

    curious about the same thing.   What happened when you got your PC...was it a single line out or truly the 3 stacked 5.1 as advertised.

  • Alex09

    27 Posts

    1664

    0

    Posted March 2nd, 2014 17:00

    It has a line-in/mic/speaker out set up, so one plug for speakers. I haven't tried remapping - if you even can. The software is a combo of Dell/Windows 8 as opposed to the Realtek software you might see in Windows 7 for example. While it allows a bunch of different audio settings, there isn't a remapping option there.

    There could be a software download available from Realtek that could be used but I haven't checked. I use the "Matrix" button option on my Logitech Z-5300s to push the sound to all speakers. It's fine for now.

    EDIT: Made a booboo in first paragraph.

  • 1664

    2

    Posted March 15th, 2014 07:00

    Alex...I did end up buying this computer.   I found that the inputs/outputs are configurable.  When I put my front, center, and right inputs into the slots it automatically asked me which type of input I was using...for example the computer asked "mic or center speaker".  This allowed me to set it up as a true 5.1.

  • Alex09

    27 Posts

    1664

    0

    Posted March 15th, 2014 11:00

    Awesome man thanks! I hadn't tried it yet so that's good to know.
  • George Tijo

    1 Message

    1664

    0

    Posted July 13th, 2014 10:00

    Hi Alex, I hope you have tried this. Please let me know if it the 5.1 worked fine for you also. I am planning to pickup Dell New Inspiron 3647. Also please let me know your experience with this system. Thanks alot in advance. Your inouts will be very helpful for me.

  • Alex09

    27 Posts

    1664

    0

    Posted July 13th, 2014 18:00

    I have not tried the solution above to be honest. I simply hooked it up as 2.1 and used the "Matrix" option on my Logitech z5300 speakers to make sound come out of all four satellite speakers (I also mentioned this a few posts up). I do not watch movies with it but music sounds great. The computer is great, no problems aside from the fact there was a manufacturing defect with the case, but that got sorted. Fast (i5-4440 and 8 gigs RAM) and has never crashed. Windows 8 is meh but it's fine. It replaced a Dell XPS 8300 which died prematurely.